Mighty Box Parallel Port CNC Micro Stepping Motor Controllers for NEMA 23 Step Motors
Parallel Port Step and Direction Interface
Mach3 Compatible
XYZ, XYY, XYZA, XYYZ Configurations Available
Parallel Port Step and Direction Interface Mach3 Compatible
Plug and Play Compatible with USB CamPod and SuperCamXp

Typical Use:
XYZ Grantry type tables with NEMA 23 size stepper motors
XYYZ Gantry Type Tables where two(2) Motors Run the Bridge
Rack and Pinion or Lead Screw and Nut Linear Drive Type Applications
Engravers, Glue spreaders, Plasma tables, Small Routers Table and Mills.

Works with NEMA 23 Stepper Motors
Each motor has it's own drive electronics
Each motor has trimpot for setting motor phase current
Each motor has home limit switch circuit
Each motor has a DB9 female connector
 		Micro Step Motor Driver Electronics
Unipolar Motor Windings Required Six(6) Wires
3 Ampere Maximun Phase Currents
400, 800, 1600, 3200 Jumper Set Step Resolutions
By Default 1600 Steps per Revolution

Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable
Two(2) 10 Ampere Relays for Torch or Spindle Motor Control
Relays switched Power Recepticals
Or Relay Contact Terminal Block for Plasma Torch Tables
10" x 10" x 4" Metal Utility Box
Foam Filters for Vents on the Box


EMC-XYAZ-MUBX-K4B
XYYZ Three Axis, Four Motor Configuration
For Grantry Bridge Mechanical Designs 		EMC-XYAZ-MUBX-K4
Four Axis Micro Stepping Motor Controller
To be used with Micro Mills with 4th Axis Rotary Tables


EMC-XYZ-MUBX-K3
XYZ Three Axis Setup for Micro Mills and Engravers 		USB Mighty Box Controllers
XYZ Three Axis Setup for Micro Mills and Engravers
EMC-XYYZ-MUBX-K4
Three Axis, Four Motor Controller, Motors and Cables,
NEMA 23 Motors, 1/4 Inch Double Shafts

EMC-XYY-MUBT-K3
Three motors, The Two Y Motors are Synchronized
Terminal Block on Panel are Relay Contacts
NEMA 23 Motors, 1/4 Inch Double Shafts

EMC-XYY-MUBX-K3
Three motors, The Two Y Motors are Synchronized
Power Recepticals on Panel are Relay Controlled
NEMA 23 Motors, 1/4 Inch Double Shafts
Mighty Box Parallel Interface Price List
 400,800,1600,3200 Steps Per Revolution, 3 ampere, Unipolar Windings
Part# EMC-XYAZ-MUBX-K4   XYAZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Four(4) Axis, Step Motor Controller. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface, compatible with Mach3. In metal utility box 10 x 10 x 4 inches.   Weight: 28 lbs........$1495.00 Part# EMC-XYZ-MUBX-K3   XYZ, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis, Step Motor Controller. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included.   Weight: 25 lbs........$1295.00
Detailed Information Part# EMC-XYYZ-MUBX-K4   XYYZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Four(4) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included.   Weight: 28 lbs........$1495.00 Detailed Information Part# EMC-XYY-MUBX-K3   XYY, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two Y motors are synchronized. 1600 steps per revolution. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. With internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) motors and the cables included.   Weight: 25 lbs........$1395.00
Part# EMC-YXX-MUBX-K3   YXX, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two X motors are synchronized. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included.   Weight: 25 lbs........$1395.00

Click on CheckBox to include in Order - Click on 'AddToCart' to Create New Order or Add Item

Home Page at http://www.super-tech.com
http://www.super-tech.com/root/EMC-MightyBox.html
Published 1/30/2017 4:55:18 PM
Copyright 2016 Dennis Bohlke