Mighty Box Parallel Port CNC Micro Stepping Motor Controllers for NEMA 23 Step Motors

Mighty Box Parallel Port CNC Micro Stepping Motor Controllers for NEMA 23 Step Motors Parallel Port Step and Direction Interface Mach3 Compatible
XYZ, XYY, XYZA, XYYZ Configurations Available Parallel Port Step and Direction Interface Mach3 Compatible Plug and Play Compatible with USB CamPod and SuperCamXp Typical Use: XYZ Grantry type tables with NEMA 23 size stepper motors XYYZ Gantry Type Tables where two(2) Motors Run the Bridge Rack and Pinion or Lead Screw and Nut Linear Drive Type Applications Engravers, Glue spreaders, Plasma tables, Small Routers Table and Mills. Works with NEMA 23 Stepper Motors Each motor has it's own drive electronics Each motor has trimpot for setting motor phase current Each motor has home limit switch circuit Each motor has a DB9 female connector	Micro Step Motor Driver Electronics Unipolar Motor Windings Required Six(6) Wires 3 Ampere Maximun Phase Currents 400, 800, 1600, 3200 Jumper Set Step Resolutions By Default 1600 Steps per Revolution Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable Two(2) 10 Ampere Relays for Torch or Spindle Motor Control Relays switched Power Recepticals Or Relay Contact Terminal Block for Plasma Torch Tables 10" x 10" x 4" Metal Utility Box Foam Filters for Vents on the Box

EMC-XYAZ-MUBX-K4B XYYZ Three Axis, Four Motor Configuration For Grantry Bridge Mechanical Designs	EMC-XYAZ-MUBX-K4 Four Axis Micro Stepping Motor Controller To be used with Micro Mills with 4th Axis Rotary Tables

EMC-XYZ-MUBX-K3 XYZ Three Axis Setup for Micro Mills and Engravers	USB Mighty Box Controllers XYZ Three Axis Setup for Micro Mills and Engravers
EMC-XYYZ-MUBX-K4 Three Axis, Four Motor Controller, Motors and Cables, NEMA 23 Motors, 1/4 Inch Double Shafts EMC-XYY-MUBT-K3 Three motors, The Two Y Motors are Synchronized Terminal Block on Panel are Relay Contacts NEMA 23 Motors, 1/4 Inch Double Shafts EMC-XYY-MUBX-K3 Three motors, The Two Y Motors are Synchronized Power Recepticals on Panel are Relay Controlled NEMA 23 Motors, 1/4 Inch Double Shafts

Mighty Box Parallel Interface Price List 400,800,1600,3200 Steps Per Revolution, 3 ampere, Unipolar Windings
Part# EMC-XYAZ-MUBX-K4 XYAZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Four(4) Axis, Step Motor Controller. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface, compatible with Mach3. In metal utility box 10 x 10 x 4 inches. Weight: 28 lbs........$1,495.00	Part# EMC-XYZ-MUBX-K3 XYZ, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis, Step Motor Controller. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included. Weight: 25 lbs........$1,295.00
Detailed InformationPart# EMC-XYYZ-MUBX-K4 XYYZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Four(4) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included. Weight: 28 lbs........$1,495.00	Detailed InformationPart# EMC-XYY-MUBX-K3 XYY, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two Y motors are synchronized. 1600 steps per revolution. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. With internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) motors and the cables included. Weight: 25 lbs........$1,395.00
Part# EMC-YXX-MUBX-K3 YXX, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two X motors are synchronized. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included. Weight: 25 lbs........$1,395.00