MightyBx IVB Parallel Port Signal Pin Assignments| |  The MightyBx IVB uses a standard PC Parallel Port interface to attach to the Desktop computer. Parallel port signal wires are electronically buffered from the motor driver chips. Motor step signals are normally low. Axis X motor Step is on Pin 2, Direction is on Pin 3, Limit Switch on Pin 11.Axis Y motor Step is on Pin 4, Direction is on Pin 5, Limit Switch on Pin 12.Relay A is on Pin 4, Relay B is on Pin 5.Axis Z motor Step is on Pin 8, Direction is on Pin 9, Limit Switch on Pin 13.HomeMd on Pin 1 must be high during the homing sequence to synchronize the two(2) Y axis motors.ENABLE on Pin 14 engages the motors when high.*INIT on Pin 16 disables the controller when Low.HIPWR on Pin 17 enables high current to motors, when low the current is about 1/3 of the high current.During machine inactivity the motors are idling at the low power current level to reduce motor heating and provide a holding torque for the attached mechanisms. |
Adjustments Parallel Port Motor Connector Price List SuperCam 
 Home Page at http://www.super-tech.com |
Copyright 2013 Dennis Bohlke
Revised 6/09/13
 |
 |
 |