Four Axis NEMA23 Micro Stepping CNC Coordinate Postioning Motor Controller, Parallel Port Step and Direction Signals

Part Number: EMC-XYAZ-MUBT

Typical Use:
Micro Mills with Rotary Table 4th Axis

Stepper Motor Driver for each Axis, X,Y, Z and A
Parallel Port Step and Direction Interface
Mach3 Compatible
DB25 Female Parallel Port Connector
Each motor has it's own drive electronics
Each motor has home limit switch circuit
Each motor has a DB9 female connector

Unipolar motor driver configuration
Requires six(6) wire stepper motors
By Default 1600 Steps per Revolution
Jumpers for 400, 800, 1600 and 3200 Steps per Revolution
Three(3) Ampere per phase maximum current capacity
Two Independent Relays with 10A rated contacts
Terminal Block on Connector Panel for Relay Contacts
Internal 24 Volt 6.5 Amp. Power supply, 150 Watt
Input Power 120/240 VAC switchable
In metal utility box 10 x 10 x 4 inches
Price List
Price List for Four(4) Axis Micro Stepping Motor Controller
CNC Four Axis Micro Stepping Motor Controller, Parallel Port InterfacePart# EMC-XYAZ-MUBX-K4  XYAZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Four(4) Axis, Step Motor Controller. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface, compatible with Mach3. In metal utility box 10 x 10 x 4 inches.   Weight: 28 lbs........$1,495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
PN_USB-XYAZ-MUBT-TechInfo List of GIF files




Home Page at
Copyright 2015 Dennis Bohlke
Revised 03/30/15