|CNC Gecko Powered Brushed Servo Motor Controller With Three(3) Servomotors Kit|
Part Number #EMC-XYZ-GSBX-K3C
CNC XYZ Servo Motor Controller
|Three (3) Brushed Servo motors; |
250 CPR Encoders, Provides 1000 increments per revolution
Three (3) six foot servo motor cables
One (1) 10 ft. Male to Male Parallel Printer Port Cable
In Metal Utility Box 12 x 12 x 6 inches
Input voltage required is 120 or 240 VAC
|Pictures CNC Gecko Powered Brushed Servo Motor Controller With Three(3) Servomotors Kit|
This is the EMC-XYZ-GSBX Gecko Powered CNC Servo Motor Controller Box. It has parallel port input for step and direction signals.
This is the three(3) Brushed Servo Motors. The attached encoder is 250 CPR. The attached push button switch is used as the Home Limit Switch, it is crush proof.
This is one of the Servo Motor Cables, there are three(3) included with the kit.
This is the with all the cables connected up to the connector panel. The power switch is in the on position.
This is the Servomotor supplied with this kit. It is manufactured in China and pre-tested before included in the kit.
This is a closeup of the connectors on the Servomotor cables included with the kit.
Home Page at http://www.super-tech.com