This is a vestage of program development. The practical use of this tab is not normally a part of program operation.

The zoom and pan commands normally manipulate these paramenters.

View Parameters

View Wgx1 top left X

View Wgy1 top Y

View Wgx2 bottom right X

View Wgy2 bottom Y

View Xlvl the X level when the mouse is describing Y and Z.

View YlvlView Zlvl the Z level when the mouse is describing X and Y.

View Index this define which of five(5) possible view ports is active.

View Mode this defines if multiple view ports are being displayed.

View Stat this defines the current view port mode, it is either 2D or 3D.

View PanX this is the Pan X offset for 2D display.

View PanY this is the Pan Y offset for 2D display.

View PanZ this is the Pan Z offset for 2D display. Currently not used.

View Width this is the width of the area being displayed for 2D display.

View Depth this is the height of the area being displayed for 2D display.

View PixSiz this is the pixel size for 2D display.

Look From

View Qfx this is the X coordinante of the view look from point, for 3D display.

View Qfy this is the Y coordinante of the view look from point, for 3D display.

View Qfz this is the Z coordinante of the view look from point, for 3D display.

Look At

View Qxl this is the X coordinante of the view look at point, for 3D display.

View Qyl this is the X coordinante of the view look at point, for 3D display.

View Qzl this is the X coordinante of the view look at point, for 3D display.

View Daf this is the angle in degrees of the view port viewing angle, for 3D display.

View Angle this is the view port view angle in radians, for 3D display.

What's Up

View Qux this determine what is up.

View Quy this determine what is up.

View Quz this determine what is up.

View Qxc 3D parameter.

View Qyc 3D parameter.

View Qsc 3D scale factor.

View Gvw 3D paramenter.