Taig Accessories for CNC Mini Mill and Micro Lathe

Presents
Taig Tools Parts and Accessories

Taig Spindle Assembley Made from Acessories

Taig offers these parts as Accessories to their Products, by combining parts elements become useful assemblies. Following part numbers create a spindle assembly, 100-00, 1161, 1140,1191.

Part# TAIG-100-00L Complete Headstock for the Taig Lathe. Weight: 3.5 lbs........$60.25

Part# TAIG-100-00M Complete Headstock for the Taig Mill. Weight: 3.5 lbs........$60.25

Part# TAIG-1021A Motor 115V 60 HZ 1750 RPM 1/4 HP 1/2" shaft, split phase, switch and cord included........$104.50

Part# TAIG-1021WIRED Motor 115V 60hz 1750 RPM shaded pole, 1/4 HP 3/8" shaft, prewired with switch and ready to go.........$140.72

Part# TAIG-1022 Motor mount bracket with necessary hardware, fits above motors and NEMA 48 frame motors........$5.25

Part# TAIG-1023 Mounting board 12" X 18" used for No. 1021 motor (motor mount bracket not included)........$7.70

Part# TAIG-1024 Mounting board 8" X 24" used for No. 1021A (motor mount bracket not included)........$7.70

Part# TAIG-1026 Depth stop for work piece in chuck........$3.75

Part# TAIG-1030 4 jaw 3 1/4" dia. Lathe Chuck 3/4-16 thread Mount, jaws adjusted independently (reversable heat treated jaws)........$64.75

Part# TAIG-1035 Face plate 3 1/4" 3/4-16 thread mount........$14.90

Desktop CNC Machine Tool Controllers for Servo and Stepper Motors

Part# TAIG-1036 Face plate angle bracket set........$5.80

Part# TAIG-1037 Face plate 2" diameter (wood turners)........$8.10

Part# TAIG-1037-3H Face plate 2" diameter (wood turners) with 3-holes drilled........$10.90

Part# TAIG-1038 4" Swivel Joint, adjustable height Tool Rest (Wood Turners)........$26.75

Part# TAIG-1040 Collet set, collet closer with 8 collets sizes 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 & one blank........$30.80

Part# TAIG-1040ER ER16 Collet set, (1/16, 1/8, 3/16, 1/4, 5/16, 3/8)........$56.00

Part# TAIG-1041A 1/8 collet........$4.50

Part# TAIG-1041B 5/32 collet........$4.50

Part# TAIG-1041C 3/16 collet........$4.50

Part# TAIG-1041D 7/32 collet........$4.50

Part# TAIG-1041E 1/4 collet........$4.50

Part# TAIG-1041ER-A ER16 Collet 1/16........$9.85

Part# TAIG-1041ER-B ER16 Collet 3/32........$9.85

Part# TAIG-1041ER-C ER16 Collet 1/8........$9.85

Part# TAIG-1041ER-D ER16 Collet 3/16........$9.85

Part# TAIG-1041ER-E ER16 Collet 1/4........$9.85

Part# TAIG-1041ER-F ER16 Collet 5/16........$9.85

Part# TAIG-1041ER-G ER16 Collet 3/8........$9.85

Part# TAIG-1041F 9/32 collet........$4.50

Part# TAIG-1041G 5/16 collet........$4.50

Part# TAIG-1042 Collet Closer........$5.90

Part# TAIG-1043 4 Blank collets furnished unslotted for making special arbors (may be bored & slotted)........$2.90

Part# TAIG-1050 3 Jaw 3 1/4" diameter, self-centering scroll chuck (steel body) with reversable aluminum soft jaws 3/4-16 thread........$64.10

Part# TAIG-1051 Additional blank soft jaw set........$9.00

Part# TAIG-1052 Full circle soft jaw for 3 jaw chuck........$7.80

Part# TAIG-1060 4-Jaw Chuck, 3 1/4" diameter, 3/4-16 thread, self-centering scroll (steel body) with reversible aluminum soft jaws........$72.40

Part# TAIG-1090 0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thread........$37.80

Part# TAIG-1091 0-1/4" Jacobs drill chuck, commercial quality 3/8-24 thread........$10.40

Part# TAIG-1092 1/16-3/8" Jacobs drill chuck, commercial quality 3/8-24 thread........$10.80

Part# TAIG-1093 1/8-1/2" Jacobs drill chuck, commercial quality 3/8-24 thread........$15.70

Part# TAIG-1095 6 piece tool bit set, high speed steel, left & right, round nose, boring bar, cut off & 45 degree chamfer........$28.75

Part# TAIG-1096 Unground tool bits 1/4" square........$1.95

Part# TAIG-1097A Left hand tool bit........$5.30

Part# TAIG-1097B Right hand tool bit........$5.30

Part# TAIG-1097C 45 degree Camfer tool bit........$5.30

Part# TAIG-1097D Round Nose tool bit........$5.30

Part# TAIG-1097E Boring bar tool bit........$5.30

Part# TAIG-1097F Cut off tool bit........$5.30

Part# TAIG-1110 Slitting saw arbor, screws directly on spindle including wrench........$5.75

Part# TAIG-1111 .032 X 2 1/2" diameter high speed slitting saw........$12.80

Part# TAIG-1120 Grinding wheel arbor, screws directly on spindle........$6.30

Part# TAIG-1122 Grinding wheel set........$7.00

Part# TAIG-1130 Blank arbor 1.00" diameter screws directly on spindle (may be machined for special jobs)........$4.15

Part# TAIG-1132 Blank arbor........$2.75

Taig Tools Spindle Arbor For Jacobs Chucks

Part# TAIG-1140 Drill chuck arbor, attaches Jacobs chucks directly on spindle 3/8-24 thread........$11.10

Taig Tools Micro Lathe Drilling Tail Stock

Part# TAIG-1150 Drilling tailstock, lever operated, 5/8" off set with dead center, 3/8-24 thread for drill chucks........$39.50

Part# TAIG-1151 Needle bearing center, spring loaded........$16.70

Part# TAIG-1152 Die holder for tailstock (will accept 13/16" and 1.00" button dies)........$16.50

Part# TAIG-1159 Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M 315 12 1/2" flat length, Standard Belt for Micro Mill Spindle.........$8.10

Part# TAIG-1160 Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M 315 20" flat length, Normally used with the Micro Lathe.........$8.10

Part# TAIG-1161 6 step pulley set (2 pulleys per set) 3/8" motor shaft 3M 500 belt included........$25.80

Part# TAIG-1162 6 step pulley set (2 pulleys per set) 1/2" motor shaft 3M 500 belt included........$25.80

Part# TAIG-1171 Back tool post, tool bit mounts upside down, 2 tools may be used at same time........$5.10

Part# TAIG-1173 T Bar Cut-off Tool, height adjustable........$31.10

Part# TAIG-1190 Steady rest, 3/32" to 1 1/2" capacity........$25.30

Part# TAIG-1191 Headstock Mounting Extension........$12.00

Part# TAIG-1200 Top slide (compound) mounts on crosslide for cutting tapers and angles with tool post........$44.80

Part# TAIG-1210 Radius Turner, swings Tool bit in arc (makes balls)........$20.10

Taig Tools Micro Lathe Milling Attachement

Part# TAIG-1220 Milling attachment mounts directly on cross slide (2 X 3 3/4" table) Weight: 2.5 lbs........$62.90

Part# TAIG-1221 3/4-16 Chuck adaptor, adapts chuck to mill table........$14.60

Part# TAIG-1224 Fly Cutter........$20.00

Taig Tools Milling Vice for Micro Mill and Micro Lathes

Part# TAIG-1225 Milling vise, 1.25" opening X 2" wide........$27.80

Part# TAIG-1230 Complete milling cutter set of 5, (1/16" to 3/16"), 2 flute double end, 3/16" shank.........$50.60

Part# TAIG-1230A 1/16" diameter milling cutter, 2 flute double end, 3/16" shank........$11.75

Part# TAIG-1230B 3/32" diameter milling cutter, 2 flute double end, 3/16" shank........$11.75

Part# TAIG-1230C 1/8" diameter milling cutter, 2 flute double end, 3/16" shank........$11.75

Part# TAIG-1230D 5/32" diameter milling cutter, 2 flute double end, 3/16" shank........$11.75

Part# TAIG-1230E 3/16" diameter milling cutter, 2 flute double end, 3/16" shank........$11.75

Part# TAIG-1250 Riser block kit for headstock and tool post (provide 6.00 swing, riser for tailstock not included)........$25.40

Part# TAIG-1251 Tailstock riser only........$21.10

Items found 80
Click on CheckBox to include in Order - Click on 'AddToCart' to Create New Order or Add Item

Manufactured by TAIG TOOLS. MasterCard and Visa cards are accepted. How to Order

Home Page at http://www.super-tech.com

http://www.super-tech.com/root/taig/taigpart.asp
Copyright 2004 Dennis L. Bohlke
Revised 09/08/04

Presents Taig Tools Parts and Accessories

Presents
Taig Tools Parts and Accessories