Desktop PC Motor Controllers for Three Axis XYZ Machine Tools

(none)

Desktop CNC XYZ Machine Controls: Drill/Mills, Micro Mills, Bridgeport Mills,Plasma Torches, Laser, Flame Torches, Engraving Machines,Glue Dispensers, Water Jets

Super Tech's Electronic Stepper Motor Controllers are designed to provide a complete interface between a desktop computer and an XYZ machine controlled by stepper motors or brushed servo motors. NEMA 23 & 34 size Servo or Stepper Motors.

The controllers are made with Industrial Quality Components for Commercial used.

Parallel Port Hookup, Step and Direction input. Home Limit Switch circuits for each motor's status are presented to parallel port pins.

To use with Windows XP computers there is the CamPod for adapting USB signals to the Parallel port or the Mach3 control program.

Three(3) Axis machine control with Synchronized Y Motors. There are controllers where two motors are synchronized, this is to facilate using two motors to drive gantry type machines common with Routers or Plasma torchs

Two(2) Internal relays are 10 Ampere rated and are used to turn torches, spindle motors or control valves on and off in sequence and coordinated with the attached machines.

The connector panel can be made with a terminal block for connecting to the relay circuits or with power recepticals that are controlled by the internal relays.

Controllers for stepper motors have DB9 female connectors, one for each motor. Controllers for servo motors have DB15 female connectors, one for each motor.

Controllers are built in Utility boxes for rugged use environments. Fans have foam filters on them.

Integrated Circuits are mounted in Sockets, for easy maintenance.

Internal Power Supplys 120 or 240 VAC input voltages.

Pictures Desktop PC Motor Controllers for Three Axis XYZ Machine Tools




Microstep 1600 per revolution. Drives four(4) unipolar step motors. Three(3) Amperes Maximum per phase. This unit is used for controlling Micro Mills and plasma torch tables. It works with NEMA 23 size stepper motors. Microstep 1600 per revolution. Drives Three(3) unipolar step motors. Three(3) Amperes Maximum per phase. This unit is used for controlling Micro Mills and plasma torch tables. It works with NEMA 23 size stepper motors.
Three bipolar stepper motor controller. Micro Stepping, 2000 steps per revolution. Up to five(5) ampere per phase. Four bipolar Stepper motor controller. Micro Stepping 2000 steps per revolution. Up to five(5) amperes per phase. Internal power supply. Two motors synchronized for driving gantry type machines.
Configured for Three Axis Brushed Servo Motors. Works great with MicroMills and Pittman Servo Motors. Four Brushed Servo Motor Controller.










Home Page at http://www.super-tech.com
http://www.super-tech.com/root/EMC.html
Published 7/6/2017 4:27:37 PM
Copyright 2016 Dennis Bohlke