Taig-2019CR-ERM - Manual Handles Attached, CNC Ready Desktop Micro Mill Made by Taig Tools

American Made ~ Old School Precision
Part Number: Taig-2019CR-ERM
Comes with Manual handles installed so it is useful manually right away!
Height 21-3/8 in (manual) 26-3/8 in (CNC)
Width 17 in (manual) 22 in (CNC)
Depth 16-3/4 in (manual) 21 in (CNC)
Weight 65 lbs (manual) 85 lbs (CNC)
Maximum bearing runout 0.0004 in.
X axis dovetails 45 deg.
Y axis dovetails 90 deg.
Z axis steel box ways
1/2"-20 leadscrews on X,Y,& Z
All lead screw drives have friction adjustable micrometer dials in .001 inch increments
Pulley type std. 5/8 in. bore multi-step vee belt.
Steel and Hard Anodized Aluminum on All Moving Components
Adjustable Brass Gib and Precision Ground Steel Ways
Hand lapped for long life and accuracy.
Travel in X axis 12 in. (Model 2019)
Travel in Y axis 5.5 in
Travel in Z axis 6.0 in
Table dimensions 3 1/2 x 18.4 inches (Model 2019)
Maximum Z-distance to table 9.0 in
Z-Axis swivel 90 degrees
6 spindle speeds 525-5200 RPM
6 spindle speeds 1000-10000 RPM (CR mill)
Z axis column rotation up to 180 degrees
Spindle head rotation 90 degrees
Max spindle speed 10000 RPM
Sealed precision ball bearing
Bearing OD 1.5748 in., ID 0.6692 in.
Spindle nose 3/4 in. - 16 (3/4 in. SAE)

Two Boxes 21" x 16" x 10"
50 lbs and 45 lbs Each
Spindle hole 0.343 in.
Spindle ID taper 15 deg (30 deg included)
Max. collet diameter 9/32 in.
Pulley size 5/8 in. bore.
Ball Bearings in all leadscrew bearing blocks

Price List
Part# TAIG-2019CR-ERM   Control Ready Micro Mill, 5.5"x12"x6" travel, 2019 (with ER 16 SPINDLE) converted to CNC ready with Nema 23 motor mounts, adjustable bronze leadscrew nuts, and upgraded 1/4 horse power motor . Includes: Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch. Does not include stepper motors or control system. Comes with Manual handles installed so it is useful manually right away.   Weight: 93 lbs........$1235.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item

Home Page at http://www.super-tech.com
Published 7/6/2017 4:28:04 PM
Copyright 2016 Dennis Bohlke