CNC Ready Lathe is factory assembled wired up and ready to GO!

TaigTurn 2000 CR

X-Axis Hard Anodized Table with Steel Ways and a tapered Gib and Z-axis with square Steel ways

Hardened ER16 Spindle in Headstock for superior accuracy

The TAIGTurn 2000 CNC Lathe is a top of the line desktop CNC lathe.

It is a very rigid and precise machine that uses some of the most advanced techniques that allows it to produce parts that used to be done on machines that cost thousands of dollars more.

With a rapid feed of up to 75 inches per minute you can go from tool to tool in just seconds.

A key feature of the CNC Lathe is the ability to single point thread. This is accomplished using a "Digital Index Signal Processor" which was designed by Microproto Systems.

The main frame consists of a 2 1/2 inch square steel tubing to provide a very solid feel. The leadscrews are all 1/2-20 unlike a lot of machines of similar size that use 1/4 inch leadscrews.

The moving slides ride on Ground Steel Ways with full gib adjustments for wear as the years of use go by. Overall working accuracy should exceed .0005 in.

All machines are sold with a 14 day refund and a full 2 year factory warranty on all Lathe components and accessories.

GENERAL
Height 14", Width 24", Depth 31"
Weight 80 lbs
Maximum bearing runout 0.0004 in.
X axis dovetails 45 deg., Z axis dovetails 90 deg.
1/2"-20 leadscrews on X & Z
All lead screw drives have friction adjustable micrometer dials in .001 inch increments
Pulley type std. 5/8 in. bore multi-step belt.
Construction - Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.
CAPACITY
Travel in X axis 12 in.
Travel in Z axis 6 in.
Max Rapid travel per axis 75 in/min
Table dimensions 3 1/2 x 18.4 inches
4 spindle speeds 435-1800 RPM
SPINDLE (ER16 SPINDLE)
Spindle Runout less than .0003
Sealed precision ball bearing
Bearing OD 1.5748 in., ID 0.6692 in.
Spindle nose 22mm X 1.5mm
Spindle hole 0.406 in.
Spindle ID taper 8 deg (16 deg included)
Max. collet diameter 3/8 in.
Pulley size 5/8 in. bore.
Ball Bearings in all leadscrew bearing blocks
SHIPPING BOXES
Two Boxes 22x17x11 inches
60 and 49 pounds each

PAYMENT & INTERNATIONAL ORDERS
Paypal or Credit card for payment.
We handle the shipping for international orders.
Taig Tools handles shipping within the United States
Part# TAIG-2000CR   CNC Ready Lathe is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an ER 16 spindle, 3-Jaw Chuck, 2 adjustable Tool Posts, a set of 6 ER collets and Nema 23 motor mounts. (does not include 'X' or 'Z' Axis motors, Control Box or Software)   Weight: 109 lbs........$1200.00
Part# TAIG-6000CR   CNC Ready Lathe with Ball Sctrews is factory assembled wired up and ready to go. It has a 1/4 hp spindle motor and comes with an ER 16 spindle, 3-Jaw Chuck, 2 adjustable Tool Posts, a set of 6 ER collets and Nema 23 motor mounts. (does not include 'X' or 'Z' Axis motors, Control Box or Software)........$1625.00
Part# TAIG-300-75    Adjustable Tool Post Main Body   Weight: 1 lbs........$52.00
Part# TAIG-300-76    Tool Post Toolholder with slot to hold 3/8" tool.   Weight: 0.5 lbs........$38.00
Part# TAIG-300-77    Tool Post Toolholder with two 3/8" diameter holes to hold 3/8" dia. tools.   Weight: 0.5 lbs........$38.00
Part# TAIG-300-78    Tool Post Toolholder with two 5/8" diameter holes to hold 5/8" dia. tools.   Weight: 0.5 lbs........$38.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item


Home Page at http://www.super-tech.com
http://www.super-tech.com/root/Taig-2000CR.asp
Published 3/20/2017 2:57:00 PM
Copyright 2016 Dennis Bohlke