Desktop CNC Taig Micro Mills with Stepper Motors for Personal Computer Controlled Coordinate Positioning

CNC Taig Long Bed Micro Mill with Micro Stepping Motors
Plug and Play with Windows Xp and Vista.
Strong Smooth Reliable Machine Movement!
Inches or Metric Units of Measurement
Completely Assembled and Tested before Shipping.

Desktop Micro Mill
* Base Mechanism is Taig-2019CR-ER Micro Mill
* Axis Travel Distances 11.75" X, 4.75" Y, 5.25" Z.
* 0.00003125 Inch Step Increment Size.
* 20 Turns Per Inch Lead Screws on All Three Axis.
* Spindle Accepts ER-16 Collets.
* Spindle Motor is 1/4 hp, 120 VAC.
* Precision Spindle with Runout Less than 0.0005 inch.
* Spindle Pulleys have six V-belt slots for setting speeds.
* Spindle Speeds are 1050,1650, 2600, 4200, 6700, 10600.
* Crush Proof Home Limit Switches Wired and Tested.
* Spindle Power Switch on Main Column.

TAIG Accessories Included
Milling Vise
2 End Mills - 3/32 and 3/16 inch
ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch

CNC Motor Controller USB or Parallel Port Interfaces
* Mighty Box Micro Stepping Motor Controller with USB Interface.
   Controller and Motors are the Part Number: USB-XYZ-MUBX-K3
   SuperCamXp for the USB interface.

* Mighty Box Micro Stepping Motor Controller with Parallel Port Interface.
   Controller and Motors are the Part Number: EMC-XYZ-MUBX-K3
   SuperCamXp for G-code Development
   Mach3 Demonstration Version on CD

* Three 300 oz/in NEMA23 Stepper Motors.
* Internal Power Supply of 24 Volts, 6.5 Ampere
* Controller Main Power is 120 or 240 VAC input.
* Trimpot Adjustable Motor Phase Currents.
* Home Limit Switches Wired and Tested
* Relay Power Control for Spindle Motor and Auxilary Device.
* Strong Smooth Reliable Machine Movement!

Shipped in Three Boxes
Three Boxes Total Weight 120 lbs.
   22" X 17" X 12" Box weighs 50 lbs Mill Z Axis
   22" X 17" X 12" Box weighs 41 lbs Mill Base
   14" X 14" X 14" Box weights 29 lbs. Stepper Motor Controller and Motors


Super Tech's Taig Micro Mill Pictures




Taig Tool's Desktop Micro CNC 3 Axis Mill.

This the bottom part of the mill.

Front Right View, Taig Tool's Desktop Micro CNC 3 Axis Mill.

The top part attaches to the bottom part with one large nut, washer and screw. Make sure the vertical part is perpendicular to the bottom part.

Desktop Micro CNC 3 Axis Mill with three stepper motors mounted.

Micro Stepping Controller with USB interface and SuperCamXp.

Taig Tool's Desktop Micro CNC 3 Axis Mill with the electronic stepper motor controller, motor cables and the parallel cable. It is not hooked up.

Taig Tool's Desktop Micro CNC 3 Axis Mill.


Home Page at http://www.super-tech.com
http://www.super-tech.com/root/Taig-3000-LB.html
Published 7/6/2017 4:28:18 PM
Copyright 2016 Dennis Bohlke