Taig Tools Parts and Accessories

Taig offers these parts as Accessories to their Products, by combining parts elements become useful assemblies. The following part numbers create a spindle assembly, 100-00, 1161, 1140,200-48.

Taig Tool Mill and Lathe Accessories Price List
Part# TAIG-100-00   Complete Headstock for the Taig Lathe. It uses the original Taig Colets. It can also be used as a mill headstock.   Weight: 3.5 lbs........$63.90 Part# TAIG-100-01   Headstock Housing........$23.50
Part# TAIG-100-02   Lathe Bed........$62.25 Part# TAIG-100-03   Spindle........$16.45
Part# TAIG-100-03A   Complete Spindle Assembly........$36.95 Part# TAIG-100-04   Bearing (2 required)........$6.50
Part# TAIG-100-05   Bearing Spacer........$8.75 Part# TAIG-100-06   Tru Arc Clip........$0.25
Part# TAIG-100-07   Thumb Screw........$0.25 Part# TAIG-100-08   Carriage Stop........$0.50
Part# TAIG-100-09   Rack........$12.00 Part# TAIG-100-10   4-40 Screw........$0.10
Part# TAIG-100-11   Carriage........$29.25 Part# TAIG-100-12   Carriage Gib........$3.75
Part# TAIG-100-13A   Pinion Gear........$3.75 Part# TAIG-100-13B   Eccentric for Pinion Gear........$1.35
Part# TAIG-100-14   Retainer Clip........$0.20 Part# TAIG-100-15   Hand Wheel........$2.65
Part# TAIG-100-16   Handle........$0.70 Part# TAIG-100-17   Crosslide Screw........$5.25
Part# TAIG-100-18   10-32 Nut (2 required)........$0.10 Part# TAIG-100-19   10-32 Set Screw (2 required)........$0.10
Part# TAIG-100-20   Bearing Block........$2.65 Part# TAIG-100-22   Dial Crosslide........$3.65
Part# TAIG-100-23   6-32 Acorn Nut........$0.70 Part# TAIG-100-24   Handle........$0.70
Part# TAIG-100-25   Crosslide Screw Nut   Weight: 0.625 lbs........$2.65 Part# TAIG-100-26   Crosslide   Weight: 0.375 lbs........$19.35
Part# TAIG-100-27   Crosslide Gib   Weight: 0.625 lbs........$2.95 Part# TAIG-100-29   10-32 X 1 3/4 hex socket & nut........$0.20
Part# TAIG-100-30   Tool Post Block........$3.90 Part# TAIG-100-32   10-32 Square Nut........$0.10
Part# TAIG-100-33   10-32 Screw........$0.10 Part# TAIG-100-34   Thumb Screw........$0.20
Part# TAIG-200-00ER   Mill Headstock for ER16 collets........$124.50 Part# TAIG-200-03ER   ER Spindle Cartidge........$102.00
Part# TAIG-200-10   Square Tubing Base   Weight: 6 lbs........$42.00 Part# TAIG-200-15   Y Axis Extrusion   Weight: 0.5 lbs........$52.50
Part# TAIG-200-16   Steel Ways (2 required)   Weight: 0.5 lbs........$12.00 Part# TAIG-200-20   Y Saddle Casting   Weight: 18 lbs........$115.00
Part# TAIG-200-21   X Axis Tapered Gib........$20.00 Part# TAIG-200-22A   Z and Y-Axis CNC Leadscrew Nut, LH........$18.75
Part# TAIG-200-23A   X-Axis CNC Leadscrew Nut, RH........$18.75 Part# TAIG-200-25   Y-Axis Leadscrew, LH   Weight: 1.5 lbs........$24.00
Part# TAIG-200-25A   Z-Axis Leadscrew, LH........$25.00 Part# TAIG-200-26   X-Axis Leadscrew, RH, for 2018   Weight: 1.5 lbs........$26.00
Part# TAIG-200-26A   X-Axis Leadscrew, RH, for 2019   Weight: 1.5 lbs........$27.00 Part# TAIG-200-27   Dial (3 Required)   Weight: 1.5 lbs........$5.00
Part# TAIG-200-28   Dial Sleeve (3 Required)   Weight: 1.5 lbs........$2.00 Part# TAIG-200-30   Dial Handcrank (3 Required)   Weight: 0.5 lbs........$6.25
Part# TAIG-200-31   Dial Handle (3 Required)........$0.75 Part# TAIG-200-32   Dial Key Way (3 Required)........$0.25
Part# TAIG-200-35   X-Axis Table, 2018........$70.00 Part# TAIG-200-35L   X-Axis Long Table, 2019........$135.00
Part# TAIG-200-36   X,Y End Plate (2 Required)   Weight: 0.5 lbs........$3.25 Part# TAIG-200-40   Z Axis Column Assembly   Weight: 16 lbs........$68.00
Part# TAIG-200-41   Z Axis End Plate........$15.00 Part# TAIG-200-42   Z Axis 3" Steel Box Way........$15.00
Part# TAIG-200-43   Z Axis 1 1/4" Steel Box Way........$16.00 Part# TAIG-200-44   Z Axis Main Body........$84.00
Part# TAIG-200-48   Headstock Dovetail Mounting Plate drilled with mounting hole pattern.........$6.00 Part# TAIG-200-50   Spindle Motor Mount Plate........$12.00
Part# TAIG-200-51   Motor Mount Post........$7.00 Part# TAIG-200-55   Spindle Motor(1/5 hp, 1750 rpm)   Weight: 7 lbs........$58.90
Part# TAIG-200-55CR   Spindle Motor(1/4 hp, 3400 rpm)........$185.75 Part# TAIG-200-57   Threaded Rod Draw Bar   Weight: 7 lbs........$7.00
Part# TAIG-200-60   Spindle Headstock   Weight: 7 lbs........$117.50 Part# TAIG-200-61   Pulley Set(3/8, 5/8 & Belt)   Weight: 7 lbs........$25.80
Part# TAIG-200-70   CNC Motor Mount Tube (3 Required)   Weight: 0.5 lbs........$10.00 Part# TAIG-200-71   CNC Motor Mount accessory (3 Required)........$2.00
Part# TAIG-200-72   CNC Mounting Plate (3 Required)   Weight: 0.5 lbs........$5.00 Part# TAIG-200-74A   CNC Mounting Plates (3 Required)   Weight: 0.5 lbs........$6.50
Part# TAIG-200-74B   CNC Motor Coupling (3 Required)........$12.00 Part# TAIG-200-76   Bearing Block with bearings   Weight: 0.5 lbs........$12.00
Part# TAIG-1021WIRED   Motor 115V 60hz 1750 RPM shaded pole, 1/4 HP 3/8" shaft, prewired with switch and ready to go.........$140.72 Part# TAIG-1022   Motor mount bracket with necessary hardware, fits above motors and NEMA 48 frame motors........$5.80
Part# TAIG-1023   Mounting board 12" X 18" used for No. 1021 motor (motor mount bracket not included)........$8.40 Part# TAIG-1026   Depth stop for work piece in chuck........$4.00
Part# TAIG-1030   4 jaw 3 1/4" dia. Lathe Chuck 3/4-16 thread Mount, jaws adjusted independently (reversable heat treated jaws)........$70.10 Part# TAIG-1030ER   4 jaw 3 1/4" dia. Lathe Chuck 3/4-16 thread Mount, jaws adjusted independently (reversable heat treated jaws). To be used with the ER16 spindles.........$72.50
Part# TAIG-1034   Lathe Dog, holds work piece while turning between centers.........$9.95 Part# TAIG-1035   Face plate 3 1/4" 3/4-16 thread mount........$16.80
Part# TAIG-1036   Face plate angle bracket set........$6.50 Part# TAIG-1037   Face plate 2" diameter (wood turners)........$8.90
Part# TAIG-1037-3H   Face plate 2" diameter (wood turners) with 3-holes drilled........$11.90 Part# TAIG-1038   4" Swivel Joint, adjustable height Tool Rest (Wood Turners)........$27.90
Part# TAIG-1040ER   ER16 Collet set, (1/16, 1/8, 3/16, 1/4, 5/16, 3/8)........$62.15 Part# TAIG-1041ER-A   ER16 Collet 1/16........$11.15
Part# TAIG-1041ER-B   ER16 Collet 3/32........$11.15 Part# TAIG-1041ER-C   ER16 Collet 1/8........$11.15
Part# TAIG-1041ER-D   ER16 Collet 3/16........$11.15 Part# TAIG-1041ER-E   ER16 Collet 1/4........$11.15
Part# TAIG-1041ER-F   ER16 Collet 5/16........$11.15 Part# TAIG-1041ER-G   ER16 Collet 3/8........$11.15
Part# TAIG-1041ER-H   ER16 Collet 5/64........$11.15 Part# TAIG-1041ER-I   ER16 Collet 5/32........$11.15
Part# TAIG-1041ER-J   ER16 Collet 1/32........$11.15 Part# TAIG-1040   Collet set, collet closer with 8 collets sizes 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 & one blank........$34.80
Part# TAIG-1041A   1/8 collet........$5.20 Part# TAIG-1041B   5/32 collet........$5.20
Part# TAIG-1041C   3/16 collet........$5.20 Part# TAIG-1041D   7/32 collet........$5.20
Part# TAIG-1041E   1/4 collet........$5.20 Part# TAIG-1041F   9/32 collet........$5.20
Part# TAIG-1041G   5/16 collet........$5.20 Part# TAIG-1042   Collet Closer........$7.30
Part# TAIG-1042ER   ER Collet Closer for ER 16 spindle only........$12.90 Part# TAIG-1043   4 Blank collets furnished unslotted for making special arbors (may be bored & slotted)........$3.20
Part# TAIG-1045ER   Adapter that screws on to the 3/4-16 spindle and has an ER16 taper on the other end. This allows the orginal spindles with 3/4-16 threads to be used with ER16 collets.........$28.70 Part# TAIG-1050   3 Jaw 3 1/4" diameter, self-centering scroll chuck (steel body) with reversable aluminum soft jaws 3/4-16 thread........$68.75
Part# TAIG-1051   Additional blank soft jaw set........$9.90 Part# TAIG-1050ER   3 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with reversable aluminum soft jaws for an ER16 spindle (22mm x 1.5mm thread).........$72.00
Part# TAIG-1052   Full circle soft jaw for 3 jaw chuck........$9.70 Part# TAIG-1060   4-Jaw Chuck, 3 1/4" diameter, 3/4-16 thread, self-centering scroll (steel body) with reversible aluminum soft jaws........$76.20
Part# TAIG-1090   0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thread........$41.10 Part# TAIG-1060ER   4-Jaw Chuck, 3 1/4" diameter, 3/4-16 thread, self-centering scroll (steel body) with reversible aluminum soft jaws, To be used with the ER16 spindles.........$80.00
Part# TAIG-1091   0-1/4" Jacobs drill chuck, commercial quality 3/8-24 thread........$11.50 Part# TAIG-1092   1/16-3/8" Jacobs drill chuck, commercial quality 3/8-24 thread........$11.80
Part# TAIG-1093   1/8-1/2" Jacobs drill chuck, commercial quality 3/8-24 thread........$17.90 Part# TAIG-1095   6 piece tool bit set, high speed steel, left & right, round nose, boring bar, cut off & 45 degree chamfer........$32.25
Part# TAIG-1096   Unground tool bits 1/4" square........$2.40 Part# TAIG-1097A   Left hand tool bit........$6.05
Part# TAIG-1097B   Right hand tool bit........$6.05 Part# TAIG-1097C   45 degree Camfer tool bit........$6.05
Part# TAIG-1097D   Round Nose tool bit........$6.05 Part# TAIG-1097E   Boring bar tool bit........$6.05
Part# TAIG-1097F   Cut off tool bit........$6.05 Part# TAIG-1110   Slitting saw arbor, screws directly on spindle including wrench........$6.40
Part# TAIG-1110ER   Slitting saw arbor for ER spindle with 3/8" shank........$6.40 Part# TAIG-1111   .032 X 2 1/2" diameter high speed slitting saw........$14.30
Part# TAIG-1120   Grinding wheel arbor, screws directly on spindle........$6.90 Part# TAIG-1122   Grinding wheel set........$7.20
Part# TAIG-1130   Blank arbor 1.00" diameter screws directly on spindle (may be machined for special jobs)........$4.75 Part# TAIG-1132   Blank arbor........$3.20
Part# TAIG-1140   Drill chuck arbor, attaches Jacobs chucks directly on spindle 3/8-24 thread........$11.70 Part# TAIG-1140ER   Drill chuck arbor for ER spinde with 3/8" shank, attaches Jacobs chucks to ER spindle, 3/8-24 thread........$11.50
Part# TAIG-1150   Drilling tailstock, lever operated, 5/8" off set with dead center, 3/8-24 thread for drill chucks........$43.50 Part# TAIG-1151   Needle bearing center, spring loaded........$18.75
Part# TAIG-1152   Die holder for tailstock (will accept 13/16" and 1.00" button dies)........$17.30 Part# TAIG-1159   Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M 315 12 1/2" flat length........$9.75
Part# TAIG-1160   Spare Gates polyurethane vee belt (est. belt life 5000 hours) No. 3M 315 20" flat length........$9.75 Part# TAIG-1161   6 step pulley set (2 pulleys per set) 3/8" motor shaft 3M 500 belt included........$29.55
Part# TAIG-1162   6 step pulley set (2 pulleys per set) 1/2" motor shaft 3M 500 belt included........$29.55 Part# TAIG-1170   Extra tool post (same as supplied with lathe)........$5.10
Part# TAIG-1171   Back tool post, tool bit mounts upside down, 2 tools may be used at same time........$6.10 Part# TAIG-1173   T Bar Cut-off Tool, height adjustable........$33.40
Part# TAIG-1190   Steady rest, 3/32" to 1 1/2" capacity........$28.90 Part# TAIG-1200   Top slide (compound) mounts on crosslide for cutting tapers and angles with tool post........$46.90
Part# TAIG-1210   Radius Turner, swings Tool bit in arc (makes balls)........$21.50 Part# TAIG-1220   Milling attachment mounts directly on cross slide (2 X 3 3/4" table)   Weight: 2.5 lbs........$66.00
Part# TAIG-1221   3/4-16 Chuck adaptor, adapts chuck to mill table........$15.10 Part# TAIG-1224   Fly Cutter........$20.40
Part# TAIG-1225   Milling vise, 1.25" opening X 2" wide........$28.90 Part# TAIG-1230   Complete milling cutter set of 5, (1/16" to 3/16"), 2 flute double end, 3/16" shank.........$52.00
Part# TAIG-1230A   1/16" diameter milling cutter, 2 flute double end, 3/16" shank........$12.15 Part# TAIG-1230B   3/32" diameter milling cutter, 2 flute double end, 3/16" shank........$12.15
Part# TAIG-1230C   1/8" diameter milling cutter, 2 flute double end, 3/16" shank........$12.15 Part# TAIG-1230D   5/32" diameter milling cutter, 2 flute double end, 3/16" shank........$12.15
Part# TAIG-1230E   3/16" diameter milling cutter, 2 flute double end, 3/16" shank........$12.15 Part# TAIG-1250   Riser block kit for headstock and tool post (provide 6.00 swing, riser for tailstock not included)........$26.50
Part# TAIG-1251   Tailstock riser only........$21.80 Part# Taig-1260   Carriage Cross Slide Assembly, the carriage, gib, cross slide, gib, cross slide screw assembly, hand wheel, and tool post all assembled.........$67.45
Part# TAIG-1310   1" Spindle Wrench........$7.50 Part# TAIG-2225   Milling vice with handcrank, 2.125" opening x 2" wide........$32.50
Part# TAIG-2010   Tooling Plate for mill table, 4" x 14" x 5/8" with 56 10-32 holes spaced 1" on center   Weight: 6 lbs........$64.00 Part# TAIG-2228   1/4" shank Edge Finder for use on the Mill   Weight: 1 lbs........$15.00
Part# TAIG-K1019   Unassembled Micro Lathe parts kit headstock pre-assembled, no machining necessary (Pulleys tailstock not included) 15" bed   Weight: 17 lbs........$171.10 Part# TAIG-L1015   Micro Lathe II basic unit with automatic power feed, factory assembled with tool post and carriage depth stop, pulley set, mounting board and powerfeed gear box (tailstock not included) 15" bed.........$319.10
Part# TAIG-L1017   Micro Lathe basic unit, factory assembled with tool post and carriage depth stop (Pulleys Tailstock not included) 15" bed........$207.00 Part# TAIG-1016   Power feed retrofit Kit........$128.10

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item



Home Page at http://www.super-tech.com
http://www.super-tech.com/root/Taig-Products.asp
Published 3/20/2017 2:57:04 PM
Copyright 2016 Dennis Bohlke