Exit SuperCamXp Command

Exits SuperCamXp program.

First it saves the SuperCamXp.INI file then the Machine Configuration file with the .DAT file extension.

The SuperCamXp.INI file has the configuration file name in it so it will reload the same configuration file on reload of SuperCamXp.

The Machine Configuration file has the current machine location saved in it and all the machine setup configuration parameters. It also has the file names of the last import activities.

When SuperCamXp is reloaded it remembers the file name and reloads the file that was loaded when it was last terminated.

Moving the attached machines when SuperCamXp is not running makes a Home command necessary on the next program load for the position calculations to be accurate.


Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z



ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form



Home Page at http://www.super-tech.com
http://www.super-tech.com/root/cmmd_exit.html
Published 7/6/2017 4:26:59 PM
Copyright 2016 Dennis Bohlke