Moveto Mouse click or Keyboard input

MoveTo command moves the attached machine.

The MoveTo command can be selected from:
  The sidebar menu as MOVETO.
  By entering moveto at the command prompt.

Move Mechanism to Mouse Click or Keyboard Input:

The MoveTo Command moves the machine to the coordinates of the mouse click in the graphics area.

Keyboard input of coordinates is also possible.

Movement speed is determined by Z axis position.
  If above the surface of the material it will be at travel speeds.
  if below surface of material the it will be at cutting speeds.

After completion, the right mouse click will repeat the command and the machine can be moved again.

The attached mechanism can be moved to a user specified location, by using the mouse pointer or keyboard.

An absolute move can be accomplished by using the keyboard to enter the x,y coordinates.

A move relative to the current postion can also be specified from the keyboard by entering the distance to move at a specified angle.

The keyboard entry format is @dist<angle. dist is the distance to travel in the current unit. angle is the angle or direction to travel in.

Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z

ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form

Home Page at
Published 7/6/2017 4:27:11 PM
Copyright 2016 Dennis Bohlke