Off Command

This command turns off Relay A.
Keyboard Command: off
When controlling a machine by the pod the signal line for relay A is made false.
The polarity and the pin the signal is assigned to is configurable with the ArmPod.
With the CamPod the signal pin by default is on Pin 6.
Clicking on the bottom status bar panel 'Relay A' will toggle the relay A.
The Home key on the Keyboard will toggle the relay A also.


Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z



ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form



Home Page at http://www.super-tech.com
http://www.super-tech.com/root/cmmd_off.html
Published 2/10/2017 8:10:05 AM
Copyright 2016 Dennis Bohlke