Create Offset Line from another Line
Offset draws offsetting lines reference of other lines.

The offset command can also be selected from:
  The sidebar menu.
  The Draw pull down menu.
  By entering offset at the command prompt.

First prompt
Offset Distance (0.063) <Default|Cancel>:

Second prompt
Select Item to Offset:

Third prompt
Select Side to Offset(0.063) <Pick|Cancel>:

Displays Message
Do the Offset Process..Done


Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z



ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form



Home Page at http://www.super-tech.com
http://www.super-tech.com/root/cmmd_offset.html
Published 7/6/2017 4:27:12 PM
Copyright 2016 Dennis Bohlke