On Command

This command turns on Relay A.
Keyboard Command: on
When controlling a machine by the pod the signal line for relay A is made true.
By legacy default this is pin 6.
The ArmPod can assign the signal pin on the parallel port connector by software configuration. The CamPod assigns this signal to pin 6 but it can be jumpered to other pins.
Clicking on the bottom status bar panel 'Relay A' will toggle the relay A.
The Home key on the Keyboard will toggle the relay A also.


Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z



ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form



Home Page at http://www.super-tech.com
http://www.super-tech.com/root/cmmd_on.html
Published 7/6/2017 4:27:13 PM
Copyright 2016 Dennis Bohlke