Plotbuff Command

Executes the whole drawing as toolpath.
PlotBuff command causes machine to follow the drawing.

The PlotBuff command uses the all the items in the drawing buffer.

It starts at the first graphic item. The machine will follow the drawing.

Item Count contains the number of graphic items that are currently selected. To deselect the last item selected the keystroke Shift-Backspace will do that. Clicking on the Top Status bar 'Items Selected' will deselect all the currently selected items.

Altitude textbox displays how high above the surface the cutting tip will travel between cutting moves.

Surface textbox displays the current Z coordinate for the materials surface.

Depth textbox displays the current distance below the surface the cutting tip will be driven by the Z axis for the tool pass.

Incr checkbox when checked will cause the a multi pass making progressively deeper cuts until it reaches the Final Cut depth making each pass deeper by the Incr Cut distance.

Final Cut textbox contains the final cutting depth for multi passes to cut the selected items.

Incr Cut textbox contains the incremental cut amount for each pass when the Incr checkbox is checked.

Apply button applies any changes made to the program properties after a change has been made to a textbox.

Exit button exits the PlotItem command.

Zmax checkbox when clicked will cause the Z axis to be moved to the maximum value for the Z axis at the end of the tool path movements. This gets the cutting tool out of the way and easier to inspect the results and remove the stock material.

Z Max button will move the Z axis to the maximum position.

MoveTo button will let the user move the spindle around with a mouse click in the graphics area or keyboard coordinates.

SetMsurf button lets the user set the material surface coordinate.

Z Surface button moves the spindle down to the material surface coordinate.

SetXYLoc button lets the user redefine the spindle location in the working volume of the attached machine.

XY to Zero button move the spindle to the Zero location for X and Y axis motors.

Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z

ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form

Home Page at
Published 7/6/2017 4:27:14 PM
Copyright 2016 Dennis Bohlke