Draw Point Command
Point draws a point in drawing buffer

The point command can also be selected from:
  The sidebar menu.
  The Draw pull down menu.
  By entering point at the command prompt.

Prompts
Center: <Pick|Done>:


Console area displayed messages during Point command execution.

Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z



ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form



Home Page at http://www.super-tech.com
http://www.super-tech.com/root/cmmd_point.html
Published 2/10/2017 8:10:09 AM
Copyright 2016 Dennis Bohlke