Rotate Graphic Items
Rotate command rotates graphic items.

The rotate command can be selected from:
  The sidebar menu.
  The Edit pull down menu.
  By entering rotate on the command line.

First prompt
Select Item to Rotate <Pick|Done>:

Second prompt
Base Point <Pick|Done>:

Third prompt
Angle Point <Pick|Done>:


Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z



ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form



Home Page at http://www.super-tech.com
http://www.super-tech.com/root/cmmd_rotate.html
Published 7/6/2017 4:27:17 PM
Copyright 2016 Dennis Bohlke