Zoom Limits Command
Zoom to Limits of the attached Machine working volume
The Zoom Limits command zooms the graphics area to the limits of the machine.

The Zoom Limits command can be selected from:
  The sidebar menu as ZOOML.
  The Display pull down menu.
  By entering zooml at the command prompt.
  F4 function key.

Displays Message
Zoom to Mechanical Limits

It uses the parameters for the machine defined in the Mconfig|Limits dialog window.

When display is in 3D mode the view point is move around the machine working volume to six(6) different positions.


Command Menus Arc Array BMP Change Order Circle Copy Erase Line Join Move
Extend Trim Info On Off Moveto DXF Mirror HPGL Rotate Editcnc Grid Export Gcode Scale Snap
Swapend Point Plot Buff Plot Item Text Text Center Text Fit X Y Z



ArmPod SuperCamXp Installation USB Driver Installation Make Acrylic Panel
Screens SideBar Menu USB Control Main Form



Home Page at http://www.super-tech.com
http://www.super-tech.com/root/cmmd_zooml.html
Published 7/6/2017 4:27:33 PM
Copyright 2016 Dennis Bohlke