www.super-tech.com
STA-MicroMill-HOW-1.2

2. Line up Drawing to Material.
2.1. Bring the spindle down by using the PgDn key or the Z command. The object is to be able to tell where the tool tip is in relation ship to the stock material.
2.2. Move the spindle to the place on the raw stock that will be the bottom left of the part that is going to be created. The Arrow keys can be used or the MOVETO command with the mouse to position the mill spindle.



Home Page at http://www.super-tech.com

http://www.super-tech.com/root/cnc.asp
Copyright 2016 Dennis Bohlke
Revised 03/12/16 dlb