www.super-tech.com
STA-MicroMill-HOW-1.4

4. Move to Limits of part drawing.
4.1 Use the MOVETO command to move the spindle to the edges of the tool path boundary.
4.1.1.The objective is to make sure the part will be contained on the raw stock provided.
4.1.2.The objective is to make sure spindle will not hit any material holding clamps.



Home Page at http://www.super-tech.com

http://www.super-tech.com/root/cnc.asp
Copyright 2016 Dennis Bohlke
Revised 03/12/16 dlb