www.super-tech.com
STA-MicroMill-HOW-1.5

5. Set Cutting Paramenters for first outline.
5.1 Use the pull down menu SETUP, command SETZDPTH to set the depth of cut to be 0.02 inch.
5.2 Set the cutting speed to be 0.100 inch per second.
5.3 Set the Cutting Slew Speed to be 0.200 per second.
5.4 Set the Cutting Ramp to be 0.01 rate.



Home Page at http://www.super-tech.com

http://www.super-tech.com/root/cnc.asp
Copyright 2016 Dennis Bohlke
Revised 03/12/16 dlb