SuperCamXp updated for HyperTherm THC Part Number: 228116

SuperCamXp Mconfig / Motors for configuring the servo motors.

Mconfig / Delays has the checkbox to enable the THC sensing.

CamPod Control Dialog Window
Click on Main Screen bottom left corner 'USB OK'
Status tab shows the Status of Motion and Error inputs.
Motion status is the one to the left and it needs to be Low for cutting motion to take place.
When Error Status is Low something is wrong with the Torch Height Control and a motion interrupt is induced.

USB Armpod pin signal assignments
Click on Main Screen bottom left corner 'USB OK'
Then click on the 'ARMPOD' button

Home Page at http://www.super-tech.com

Copyright 2016 Dennis Bohlke
Revised 03/12/16 dlb