www.super-tech.com
Offset Command
Offset draws offsetting lines reference of other lines.

The offset command can also be selected from:
  The sidebar menu.
  The Draw pull down menu.
  By entering offset at the command prompt.

First prompt
Offset Distance (0.063) <Default|Cancel>:

Second prompt
Select Item to Offset:

Third prompt
Select Side to Offset(0.063) <Pick|Cancel>:

Displays Message
Do the Offset Process..Done


Console area displayed messages during Offset command execution.


Home Page at http://www.super-tech.com

http://www.super-tech.com/root/cnc.asp
Copyright 2016 Dennis Bohlke
Revised 03/12/16 dlb