|GeckoPwr IV Electronic Micro Step Motor Controllers|
This controller is designed to handle large gantry type machines that require two synchronized motors.
GeckoPwr IV is a three Axis Micro Stepping Electronic Stepper Motor Controller.
Connects to standard parallel port on desktop PC, Step and Direction motor inputs.
Geckodriv G201 Micro Stepping Drive for each motor providing 2000 steps per revolution, resolution of movement.
Internal Trim Pots for Adjustable Bipolar Motor Currents, one for per Motor, 1.0 to 5.0 Ampere.
There is a DB9 female connector for each of the three stepper motors.
Two internal 10 Ampere contract relays. Relay A is used to turn Torch or Spindle motors on/off.
There are two connector panel styles. The connector panel can have either power recepticals for the main input AC or a terminal block with the Normally Open relay contacts presented
Internal power supply is 40 Volts DC unregulated, 16.6 Amperes constant current capacity.
Input 120/ 240 VAC power required.
Controller is built in a standard metal utility box 12" X 12" X 6", with two fans for forced air cooling. Rubber feet are mounted on the bottom.
Shipping Weight is 26 lbs.
Home Page at http://www.super-tech.com