EMC-XYYZ-GSBX Servo Controller Specifications
Computer Interface:Standard Parallel Port, Female DB25 connector on box
Input Power:120 or 240 VAC
Internal Power Supply:60 Volts DC unregulated
Axis:X, Y1, Y2, Z
The Y1 and Y2 motors are synchronized
Motor Type:Brushed DC Servo Motor
With Quadrant TTL optical encoder
Single Ended Encoder Signals
Motor Sizes:NEMA 23 or NEMA 34 frame size
Motor Drive Configuration:NEMA 23 or NEMA 34 frame size
Motor Connectors:Female DB15 connector, one for each motor
Minimum Step Pulse Width:5 microsecond, Normally Low
Limit Switches:One per Motor Connector, Pin 14 & 15
Y axis limit switches synchronize the Y motors during HOME command
Relays:Two internal 10 ampere contact relays
Terminal Block on connector panel or Switched Power Outlets
Cooling:Large internal heatsink for drive modules
Two fans draw air in and force it out of cabinet over heatsinks
Cabinet Construction:All Metal UL approved electrical enclosure
Rubber Feet on Bottom
Panel Connections:Power ON/OFF Switch
Parallel Interface DB25 Female Connector
Four(4) DB15 Female Connectors
Terminal Block or Switched Power Outlets
Box Size:12" x 12" x 6" Box with removeable cover
Color:Tool Grey with Black Acrylic Connection Panel
Controller Box Weight:36 lbs


Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=EMC-XYYZGS-Specifications
Copyright 2016 Dennis Bohlke
Revised 03/12/16