MightyBx IIIB Motor Connector Pin Assignments

There are separate connectors for each X, Y and Z stepper motor.

The individual motor connectors are female DB9,

Connections for motor phase circuits, there are home limit switch input and +5 Volt output.

Pins 2 and 3 are for Phase A and B of the motor.

Pins 4 and 5 are for the Phase C and D of the motor windings.

Pin 7 is +5 Volts for powering active home limit switches.

Pin 8 is home limit switch sense input, there is a pull up to +5V.

Pin 9 is ground the return side of the switch.

Stepper Motors with Unipolar windings can also be used.

MightyBx IIIB Adjustments Parallel Port Signals Motor Connector Price List Mach3 Config File












Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=EMC-XYZB-MotorConn
Copyright 2016 Dennis Bohlke
Revised 03/12/16