EMC-XYZ-GBX Performance Testing Motor
Motor Part Number :MTR-341S
Motor Windings :Series Bipolar
Processor & Clock Speed :Cyrix 6x86 mx, 266mhz
Host Operating System :Windows 98
Motor Part Number :MTR-342D
Internal Power Supply Voltage :66 Volt Unregulated
Motor Loading :Unload, free wheeling
Linear Step Distance :0.0005 inch
Start/Stop Step Count :2000    One(1) full revolution
Ramp Rate :0.05 inch

Phase Current Setting :1.0 Amp    Test point reads 8.15k ohm, 2.544 volts
Maximum Starting Steps/Second :4900
Maximum Steps/Second :15300

Phase Current Setting :2.0 Amp    Test point reads 18.01k ohm, 4.75 volts
Maximum Starting Steps/Second :6700
Maximum Steps/Second :30000 plus

Phase Current Setting :3.0 Amp    Test point reads 36.0k ohm, 7.42 volts
Maximum Starting Steps/Second :7800
Maximum Steps/Second :30000 plus

Phase Current Setting :4.0 Amp    Test point reads 62.0k ohm, 9.69 volts
Maximum Starting Steps/Second :8300
Maximum Steps/Second :30000 plus

Phase Current Setting :~5.0 Amp    Test point reads 105.5k ohm, 11.73 volts
Maximum Steps/Second :8500
Maximum Starting Steps/Second :30000 plus
EMC-XYZ-GBX Performance Testing Motor
Motor Part Number :MTR-342D
Motor Windings :Series Bipolar
Processor & Clock Speed :Cyrix 6x86 mx, 266mhz
Host Operating System :Windows 98
Motor Part Number :MTR-342D
Internal Power Supply Voltage :66 Volt Unregulated
Motor Loading :Unload, free wheeling
Linear Step Distance :0.0005 inch
Start/Stop Step Count :2000    One(1) full revolution
Ramp Rate :0.05 inch

Phase Current Setting :1.0 Amp    Test point reads 8.15k ohm, 2.544 volts
Maximum Starting Steps/Second :4800
Maximum Steps/Second :10800

Phase Current Setting :2.0 Amp    Test point reads 18.01k ohm, 4.75 volts
Maximum Starting Steps/Second :6700
Maximum Steps/Second :30000 plus

Phase Current Setting :3.0 Amp    Test point reads 36.0k ohm, 7.44 volts
Maximum Starting Steps/Second :7500
Maximum Steps/Second :30000 plus

Phase Current Setting :4.0 Amp    Test point reads 62.0k ohm, 9.69 volts
Maximum Starting Steps/Second :8000
Maximum Steps/Second :30000 plus

Phase Current Setting :~5.0 Amp    Test point reads 105.5k ohm, 11.73 volts
Maximum Steps/Second :8200
Maximum Starting Steps/Second :30000 plus
Controller Pictures Input Voltage Wiring Setup Geckodrive Jumpers Current Adjustments Motor Connector Price List



Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=EMC-XYZG-Performance
Copyright 2016 Dennis Bohlke
Revised 03/12/16