EMC-XYZ-GBX CNC Machine Tool Controller
Computer Interface :Standard Parallel Port, Female DB25 connector on box
Input Power :117 VAC or 220 VAC
Internal Power Supply :60 Volts DC unregulated
Axis :X, Y, Z
optional X, Y1, Y2 the two(2) Y axis motors are Synchronized
Motor Type :Stepper
Motor Sizes :NEMA 23 or NEMA 34 frame size
Motor Drive Configuration :Microstepping Gecko 201 drives
Motor Connectors :Female DB9 connector one for each motor
Pin 2 to 3 Phase Coil A
Pin 4 to 5 Phase Coil B
Steps Per Revolution :2000
Minimum Step Pulse Width :5 microsecond, Normally Low
Phase Current :Trimpot Adjustable for each motor
Maximum 5 Ampere per phase per Motor
Limit Switches :One per Motor Connector, Pin 8 & 9
option xyyY limit switches are used to synchronize Y motors
Relays :Two internal 10 ampere contact relays
Four(4) circuit Terminal block on connector panel for hookup
Cooling :Large internal Heatsink for Drive modules
Cabinet Contruction :All Metal UL approved electrical enclosure
Box Size :12" X 12" X 6"
Connections Face Plate :Power ON/OFF Switch
Parallel Interface DB25 Female Connector
Three(3) DB9 Female Connectors
Terminal Block, four(4) circuit
Color :Tool Grey with Black Connection Panel
Mounting Hole Pattern :Four(4) 0.25 holes, 10.0 Inch Square Pattern
Total Shipping Weight :18 lbs
Controller Pictures Input Voltage Wiring Setup Geckodrive Jumpers Current Adjustments Motor Connector Price List

Home Page at http://www.super-tech.com

Copyright 2016 Dennis Bohlke
Revised 03/12/16