CNC Gecko Powered Three(3) Axis Brushed Servo Motor Controller

(none)

This Machine Tool Servo Motor Controller was designed to operate with brushed servo motors that have encoders attached.

Parallel Port Control Inputs for step and direction.

There is a DB15 Female connector for each servo motor. The encoder signals, servo power and limit switches are all combined into this connector.

Uses Geckodrive G320 Servo Motor Driver Modules that are mounted on a large extruded aluminum heat sink this insures long life and consistent performance during periods of extend use.

Each motor has it's own driver module, on which there are trimpots for adjusting Gain, Dampening and Maximum Current.

The two internal relays are 10 ampere contact type.

There are two connector panel styles. The connector panel can have either power recepticals for the main powert AC or a terminal block with the Normally Open relay contacts presented.

Fan for cooling with grill and foam filter for keeping metal chips out of the inside of the box.

Built in Power Supply provides 40 Volts at up to 16.6 Amperes unregulated DC to the power servo motors.

Input Voltages of 120/240 VAC, fused.

Power Switched on the connector panel.

Housed in Metal Utility Box 12" X 12" X 6"

Weight of 26 lbs.


Connector Panel on Controller.

Control Box

Parallel Port Cable
CNC Gecko Powered Three(3) Axis Brushed Servo Motor Controller Price List
PN#EMC-XYZ-GSBX-K3C, Three(3) NEMA23 Brushed Servo Motors, Cables and Gecko Powered Controller KitPart# EMC-XYZ-GSBX-K3C  XYZ, Three(3) Motor, Three(3) Axis, Brushed Servo Motor Controller. Internal 40 Volt, 16.6 Ampere Power Supply, Input Voltage is 120/240 VAC. Includes: Three (3) DC Brushed Servo Motors, Three(3) Servo Motor cables each 6 foot long, One (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 48 lbs........$1,695.00
Details Three(3) Big Brushed Servo Motor Controller Kit, Differential Encoder SignalsPart# EMC-XYZ-GSDX-K3B  XYZ, Three(3) Motor, Three(3) Axis, Differential Encoder input, Brushed Servo Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: Three (3)NEMA 34 Size Servo motors, Torque 850 oz/in; three (3) six foot motor cables; One (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 60 lbs........$3,995.00
Part# SMTR-CBL-SE6  Servomotor Cable, Single End Signals from Encoder, 15 ampere Maximum Armature current, 6 foot long, DB15 male to female connectors.   Weight: 2 lbs........$60.00
USB ArmPod in the Black Box.  USB to Parallel Port Step and Direction CNC Motor ControlPart# USB-ArmPod  ArmPod is USB to Parallel Port Type Connector for XYZ Three Axis Motor Indexer for Generating Step and Direction Signals for Motor Drivers and Relay Control signals. Programable Signal Pin Assignments. Comes with SuperCamXp Machine Control Program, Windows Xp, Windows 7 and Vista Compatible CNC Machine Tool Motor Control. CAD Graphical User Interface Alternative to Mach3.   Weight: 3 lbs........$495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
Servos for Plasma Tables Servo Motors




Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=EMC-XYZGS
Copyright 2016 Dennis Bohlke
Revised 03/12/16