Mighty Box XYAZ Four(4) Axis Micro Stepping Four(4) Motor Controller Kit

Part Number: EMC-XYAZ-MUBX-K4
Stepper Motor for each Axis, X,Y, Z and A
Each motor has it's own drive electronics
Each motor has home limit switch circuit
Each motor has a DB9 female connector
Parallel Port Step and Direction Interface

Typical Use:
Micro Mills with Rotary Table 4th Axis

Unipolar motor driver configuration
Requires six(6) wire stepper motors
By Default 1600 Steps per Revolution
Jumpers for 400, 800, 1600 and 3200 Steps per Revolution
Three(3) Ampere per phase maximum current capacity
Two(2) Control the Power to Two Main Power Recepticals on Connector Panel
Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable
In metal utility box 10 x 10 x 4 inches

Includes
Four(4) NEMA23 300 oz/in Stepper Motors
With 0.25 Inch Double Shafts
With Home Limit Switch
Three(3) Motor Cables
Parallel Port Male to Male Cable

Connector Panel on EMC-XYAZ-MUBX controller box

Four(4) Stepper Motors with Home Limit Switches

Four(4) Stepper Motor Cables
 
Price List
Price List for Four(4) Axis Micro Stepping Motor Controller
CNC Four Axis Micro Stepping Motor Controller, Parallel Port InterfacePart# EMC-XYAZ-MUBX-K4  XYAZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Four(4) Axis, Step Motor Controller. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface, compatible with Mach3. In metal utility box 10 x 10 x 4 inches.   Weight: 28 lbs........$1,495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
Part Number: EMC-XYAZ-MUBX-K4 Technical Information

graphics/EMC-XYAZ-MU-Parallel_Pinout.gif

graphics/EMC-XYAZ-MU-MotorConnector.gif

graphics/EMC-XYAZ-MU-ResolutionJumpers.gif







Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=PN_EMC-XYAZ-MUBX-K4
Copyright 2016 Dennis Bohlke
Revised 03/12/16