Parallel Port Step & Directon XY CNC Two(2) Axis Micro Stepping Three(3) Motor Controller
Part Number: EMC-XYY-MUBX

Key Features:
XYY Axis Configuration.
Configured to run three(3) motors on two(2) axis with the Y motors synchronized.
This is for driving gantry styled machines with a motor on each end of the gantry bridge.
Parallel Port Step and Direction
Mach3 Compatible

Typical Use:
XYY Grantry type tables with NEMA 23 size stepper motors
Plasma Tables
Lasers
Flame Cutters
Glue Spreaders

Micro Step Unipolar Motor Driver Configuration
Requires Six(6) Wire Stepper Motors
By Default 1600 Steps per Revolution
Jumper Configurable 400, 800, 1600, 3200 Steps Per Revolution
Three(3) Ampere Per Phase Maximum Current Capacity
Each Motor has it's Own Drive Electronics
Each Motor has Home Limit Switch Circuit with Low-Pass Filter
Each Motor has a Nine(9) Pin DB9 Female Connector
Two(2) Control the Power to Two Main Power Recepticals on Connector Panel
Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable
In metal utility box 10 x 10 x 4 inches.
EMC-XYY Price List
Detailed InformationPart# EMC-XYY-MUBX-K3  XYY, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two Y motors are synchronized. 1600 steps per revolution. Two(2) Control the Power to Two Main Power Recepticals on Connector Panel. With internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) motors and the cables included.   Weight: 25 lbs........$1,395.00
Detailed InformationPart# EMC-XYY-MUBT-K3  XYY, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Two(2) Axis. Step Motor Controller. The two Y motors are synchronized. 1600 steps per revolution. Two(2) Controlled Relays with Contacts presented on Terminal Block on Connector Panel. With internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Three(3) motors and the cables included.   Weight: 25 lbs........$1,395.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item







Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=PN_EMC-XYY-MUBX
Copyright 2016 Dennis Bohlke
Revised 03/12/16