Gecko Powered Four(4) Motor, Three(3) Axis CNC Controller with Terminal Block for Relay Contacts
Part Number: EMC-XYYZ-GBX-T

XYYZ Electronic Micro Step Motor Controller
Boxed Unit with Connection panel w/On/Off switch
120 VAC or 230 VAC Input
Internal 40 Volt @ 16.6 Ampere Power Supply
Terminal Block for Relay A and Relay B Contacts
10 foot Male to Male Parallel Printer Port Cable.

Price List
PN#EMC-XYYZ-GBX-T, Gecko Powered, Four(4) Motor, Three(3) Axis, Two(2) Y motors are synchronized, Micro Stepping ControllerPart# EMC-XYYZ-GBX-T  XYYZ, Bipolar, 2000 Step/Rev, 5 Amp Max., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Two computer controlled relays for automatic spindle or torch on/off control. Connection panel w/On/Off switch, 120/240 VAC Input, Internal 40 Volt @ 16.6 Ampere Power Supply; Includes: 10 foot Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 26 lbs........$1,995.00
PN#USB-CamPod, CNC USB Motor Controller, 3 Axis XYZ, Includes SuperCamXpPart# USB-CamPod  CamPod is USB to Parallel Port Type Connector for XYZ Three Axis Motor Indexer for Generating Step and Direction Signals for Motor Drivers and Relay Control signals. Comes with SuperCamXp Machine Control Program, Windows Xp, Windows 7 and Vista Compatible CNC Machine Tool Motor Control. CAD Graphical User Interface Alternative to Mach3.   Weight: 2 lbs........$495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
EMC-XYYZ-GBX-T CNC Machine Tool Controller
Computer Interface :Standard Parallel Port, Female DB25 connector on box
Input Power :120 Volts AC, 240 Volts AC upon request
Axis :X, Y1, Y2, Z, the two(2) Y axis motors are Synchronized
Motor Type :Stepper Bipolar Windings
Four(4) wire configuration
Motor Sizes :NEMA 23 or NEMA 34 frame size
Motor Drive Configuration :Microstepping Gecko 201 drives
Motor Connectors :Female DB9 connector one for each motor
Pin 2 to 3 Phase Coil A
Pin 4 to 5 Phase Coil B
Pin 8 to 9 Home Limit Switch
Steps Per Revolution :2000
Minimum Step Pulse Width :5 microsecond, Normally Low
Phase Current :Trimpot Adjustable for each motor
Maximum 5 Ampere per phase per Motor
Limit Switches :One per Motor Connector, Pin 8 & 9
Y limit switches are used to synchronize Y motors
Relays :Two internal 10 ampere contact relays
Four(4) circuit Terminal block on connector panel for hookup
Cooling :Large internal Heatsink for Drive modules
Two 80mm fans for forced air cooling
Cabinet Contruction :All Metal UL approved electrical enclosure
Connections Face Plate :Latching Emergency STOP Switch
Parallel Interface DB25 Female Connector
Four(4) DB9 Female Connectors
Terminal Block, four(4) circuit
Box Size :12" X 12" X 6"
Color :Tool Grey with Black Connection Panel
Mounting Hole Pattern :Four(4) 0.25 holes, 10.0 Inch Square Pattern
Total Shipping Weight :38 lbs








Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=PN_EMC-XYYZ-GBX-T
Copyright 2016 Dennis Bohlke
Revised 03/12/16