Four(4) Servo Motors, CNC XYYZ Controller and Cables
Part Number: EMC-XYYZ-GSBX-K4B

XYYZ Servo Motor Controller with four (4) Servo Motor Drives
One Geckodrive G320 module for each Servo Motor
Two(2) Servo Motors are synchronized for driving a gantry type machine at both ends
Four (4) MS3130 Servo motors Torque 1028 oz/in, 48 Volt Ratings
40 Volt, 8.3 Amp Internal Power Supply
One Male to Male Parallel Printer Port Cable
Four(4) servo motor cables, manufactured to customer specified lengths servo motor cables
Differential Amplifiers for Encoder Signals from the Motors
Independent Isolated Power Supply for Encoder Signals
Extreme Resistance to Electrical Interference
Crush Resistant Home Limit Switch included with each Servo Motor
Ready Made and Ready to Go! No Soldering required

Connect the controller to your computer, load the software and watch the motors run, then mount the motors to your machine and you are ready to go.

Price List
Servo Motor Controller, four(4) Big motors included.Part# EMC-XYYZ-GSBX-K4B  XYYZ Servo Motor Controller with four (4) servo motor drives, two are synchronized for driving a gantry machine at both ends. Includes: Four (4) NEMA 34 Servomotors 72 Volt, 8.5 Ampere, 850 oz/in; 60 Volt, 10 Amp Internal Power Supply; One Male to Male Parallel Printer Port Cable; Four (4) 10 ft. servo motor cables. In metal box 12 x 12 x 6 inches.   Weight: 87 lbs........$3,995.00
Brushed Servomotors, Controller, Cables BundlePart# EMC-XYYZ-GSDX-K4B  XYYZ, Four (4) Motor, Three(3) Axis, Differential Encoder input, Brushed Servo Motor Controller. The two Y motors are synchronized for driving a machine gantry at both ends. Internal 60 Volt, 10.4 Amp Power Supply, input voltage is 120/240 VAC. Includes: Four (4) NEMA 34 Servomotors Torque 850 oz/in; One Male to Male Parallel Printer Port Cable; Four (4) 10 ft. motor cables. In metal box 12 x 12 x 6 inches.   Weight: 87 lbs........$4,495.00
PN#USB-CamPod, CNC USB Motor Controller, 3 Axis XYZ, Includes SuperCamXpPart# USB-CamPod  CamPod is USB to Parallel Port Type Connector for XYZ Three Axis Motor Indexer for Generating Step and Direction Signals for Motor Drivers and Relay Control signals. Comes with SuperCamXp Machine Control Program, Windows Xp, Windows 7 and Vista Compatible CNC Machine Tool Motor Control. CAD Graphical User Interface Alternative to Mach3.   Weight: 2 lbs........$495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
Part Number: EMC-XYYZ-GSBX-K4B Big Brushed Servo Controller Kit Specifications
Computer Interface:Standard Parallel Port, Female DB25 connector on box
Input Power:120 VAC or 240 VAC
Internal Power Supply:40 Volts DC Unregulated
Axis:X, Y1, Y2, Z
The Y1 and Y2 motors are synchronized
Motor Type:Brushed DC Servo Motor
With Quadrant TTL optical encoder
Motor Sizes:NEMA 34 frame size
Motor Drive Configuration:Brushed DC Servo Motors with Optical Encoders with differential signal amplifiers
Geckodrive G320 modules for each motor
Motor Connectors:Female DB15 connector, one for each motor
Minimum Step Pulse Width:5 microsecond, Normally Low
Limit Switches:One per Motor Connector, Pin 14 & 15
Y axis limit switches synchronize the Y motors during HOME command
Relays:Two internal 10 ampere contact relays
Terminal Block on connector panel or Switched Power Outlets
Cooling:Large internal heatsink for drive modules
Two fans draw air in and force it out of cabinet over heatsinks
Cabinet Construction:All Metal UL approved electrical enclosure
Rubber Feet on Bottom
Panel Connections:Power ON/OFF Switch
Parallel Interface DB25 Female Connector
Four(4) DB15 Female Connectors
Terminal Block or Switched Power Outlets
Box Size:12" x 12" x 6" Box with removeable cover
Color:Tool Grey with Black Acrylic Connection Panel
Controller Box Weight:36 lbs
Shipping Weight:87 lbs
Shipping Boxes:Three(3) Boxes
One(1) 15" X 15" X 15" for the Controller
Two(2) 10" X 12" X 17" for the Servo Motors

Home Page at
Copyright 2016 Dennis Bohlke
Revised 03/12/16