EMC-XYYZ-MUBX-K4B Three Axis Micro Stepping Four(4) Motor Controller

Part Number: EMC-XYYZ-MUBX-K4B

XYYZ Configuration
The two Y motors are synchronized.
This is for driving grantry styled machines with a Y motor for each end of the gantry bridge.

Typical Use:
XYZ Grantry type tables with NEMA 23 size stepper motors
Engravers
Glue spreaders
Plasma tables,
small routers

Parallel Port step and direction Interface
Compatible with Mach3 and USB CamPod with SuperCamXp

Shipping
Weight is 28 lbs
One Box 14 x 14 x 14 Inches

Micro Step Motor Driver Electronics
Unipolar motor driver configuration
Requires six(6) wire stepper motors
By Default 1600 Steps per Revolution
Jumpers for 400, 800, 1600 and 3200 Steps per Revolution
Three(3) Ampere per phase maximum current capacity
Each motor has it's own drive electronics
Each motor has home limit switch circuit
Each motor has a DB9 female connector
Two Independent Relay Control Power Recepticals
Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable
In metal utility box 10 x 10 x 4 inches

Includes
Four(4) NEMA23 420 oz/in Stepper Motors
With 0.375 Inch Double Shafts
With Home Limit Switch
Four(4) Motor Cables
Parallel Port Male to Male Cable
EMC-XYYZ-MUBX-K4B Price List
P#EMC-XYYZ-MUBX-K4B Controller, Motors and Cables, Parallel Port InterfacePart# EMC-XYYZ-MUBX-K4B  XYYZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Internal 24 Volt 6.5 Amp. Power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Four(4) NEMA23, 420 oz/in, 3/8" Double Shafts, Double Stacked Motors and the Cables included.   Weight: 28 lbs........$1,495.00
Detailed InformationPart# EMC-XYYZ-MUBX-K4  XYYZ, Unipolar, 1600 Step/Rev, 3 Amp., Four(4) Motor, Three(3) Axis, Step Motor Controller. The two Y motors are synchronized for driving a gantry at both ends. Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable. Parallel Port step and direction Interface. In metal utility box 10 x 10 x 4 inches. Four(4) NEMA23, 300 oz/in, 0.25" Diameter Double Shafts, Double Stacked Motors with Home Limit Switches and the Cables included.   Weight: 28 lbs........$1,495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item







Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=PN_EMC-XYYZ-MUBX-K4B
Copyright 2016 Dennis Bohlke
Revised 03/12/16