PN_EMC-XYYZB-BX-K4 Four(4) Stepper Motor Kit

Four(4) NEMA 23 size stepper motors with home limit switches

Four(4) motor cables, each 10 meter long
EMC-XYYZB-BX-K4 CNC Machine Tool Controller Specification
Computer Interface :Standard Parallel Port, Female DB25 connector on box
Input Power :117 VAC or 220 VAC
Axis :X, Y, Z, the two(2) Y axis motors are Synchronized
Steps Per Revolution :400
Motor Connectors :Female DB9 connector one for each motor
Pin 2 and 3 are Phase A
Pin 4 and 5 are Phase B
Pin 8 and 9 are home limit switch
Motor Type :Stepper, Parallel Bipolar Winding Configuration
Motor Size :NEMA 23
Relays :Two internal 10 ampere contact relays
Four(4) circuit Terminal block on connector panel for hookup
Or Power A and Power B switched outlet recepticals
Minimum Step Pulse Width :5 microsecond, Normally Low
Motor Drive Configuration :Bipolar Chop Current Limited
Phase Current :Trimpot Adjustable for each motor
Maximum 2.5A for each Motor
Internal Power Supply :24 Volts DC, 150 Watt, 6.5 Ampere
Chop Clock Frequency :40 Khz
Cooling :Two(2) 12 Volt Fans wired in Series
Cabinet Contruction :All Metal UL approved electrical enclosure
Mounting Hole Pattern :Four(4) 0.25 holes, 9.125 Inch Square Pattern
Box Size :10" X 10" X 4"
Color :Tool Grey with Black Connection Panel
Total Shipping Weight :28 lbs, Shipping Box is 14 x 14 x 14 inch
Connections Face Plate :Power ON/OFF Switch
Parallel Interface DB25 Female Connector
Three(3) DB9 Female Connectors
Terminal Block, four(4) circuit

Home Page at
Copyright 2016 Dennis Bohlke
Revised 03/12/16