EMC-XYZ-GSBX-K3S Brushed Servo Motor Controller, Three(3) Small Motor Kit
Three Small Brushed Servo Motor Controller Kit

XYZ Servo Motor Controller
Internal 60 Volt Power Supply
SuperCam CNC Machine Tool Control Graphics Operating System with manual
Three (3) MS2330 Servo motors
Three (3) six foot motor cables
One (1) 10 ft. Male to Male Parallel Printer Port Cable
Metal Box 12x12x6 Inch
Input voltage required is 117/230 VAC.

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
EMC-XYZ-GSDX-K3S Performance Testing Notes
Bench test of Small Servo Motors with Differential Signals from the Encoders on the Servo Motors.
Motors are unloaded, free wheeling on the bench, with dial indicators attached to the shafts.
Differential Signal transmitters are mounted at the TTL encoder.
Two Sixteen(16) and one Twelve(12) foot Servo Motor Cables Attached.
Virtual Machine has 4:1 gear down to a 1 inch spur gear that engages a linear gear rack.
Virtual Machine is to be a 3 Axis Torch Table.
Pentium III, 600 Mhz ClockWindows 98
60 Volt Unregulated, 10 Ampere ContinuousGain 10 o'clock
Damp 10 o'clock
MaxCur 5 o'clock
Dynetic Systems, P# 230198A
75 Volts, 2 Amperes, 145 Watt
Brushed ServoUnload, free wheeling
2000.000981747 inch
44000,400 - 1/2 revolution of the motor shaft
56000.05 inch
0.01 Second, 100 hz1.0

Virtual Machine's Maximum Projected Speeds15.5
1295.9 IPM, 21.59 IPS

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
EMC-XYZ-GSDX-K3S Servo Controller Specifications
Computer Interface:Standard Parallel Port, Female DB25 connector on box
Input Power:120 or 240 VAC
Internal Power Supply:60 Volts DC unregulated
10 Ampere Continuous
Axis:X, Y, Z
or X, Y1, Y2 with Y Motors Synchronized
Motor Type:Brushed DC Servo Motor
With Quadrant TTL optical encoder
Differental Signal Transmitters
Motor Sizes:NEMA 23 or NEMA 34 frame size
Motor Drive Modules:Geckodrive G320's One Per Motor
Motor Connectors:Female DB15 connector, one for each motor
Minimum Step Pulse Width:5 microsecond, Normally Low
Limit Switches:One per Motor Connector, Pin 14 & 15
Y axis limit switches synchronize the Y motors during HOME command
Relays:Two internal 10 ampere contact relays

Terminal Block on connector panel or Switched Power Outlets

Cooling:Large internal heatsink for drive modules
One fan draw air in and force it out of cabinet over heatsink
Cabinet Construction:All Metal UL approved electrical enclosure
Rubber Feet on Bottom
Panel Connections:Power ON/OFF Switch
Parallel Interface DB25 Female Connector
Three(3) DB15 Female Connectors
Terminal Block or Switched Power Outlets
Box Size:12" x 12" x 6" Box with removeable cover
Color:Tool Grey with Black Acrylic Connection Panel
Controller Box Weight:36 lbs
EMC-XYZ-GSDX Price List Group
Details Three(3) Big Brushed Servo Motor Controller Kit, Differential Encoder SignalsPart# EMC-XYZ-GSDX-K3B  XYZ, Three(3) Motor, Three(3) Axis, Differential Encoder input, Brushed Servo Motor Controller. Internal 40 Volt, 16.6 Amp Power Supply, input voltage is 120/240 VAC. Includes: Three (3)NEMA 34 Size Servo motors, Torque 850 oz/in; three (3) six foot motor cables; One (1) 10 ft. Male to Male Parallel Printer Port Cable. In metal box 12 x 12 x 6 inches.   Weight: 60 lbs........$3,995.00
PN#USB-CamPod, CNC USB Motor Controller, 3 Axis XYZ, Includes SuperCamXpPart# USB-CamPod  CamPod is USB to Parallel Port Type Connector for XYZ Three Axis Motor Indexer for Generating Step and Direction Signals for Motor Drivers and Relay Control signals. Comes with SuperCamXp Machine Control Program, Windows Xp, Windows 7 and Vista Compatible CNC Machine Tool Motor Control. CAD Graphical User Interface Alternative to Mach3.   Weight: 2 lbs........$495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item

Home Page at http://www.super-tech.com

Copyright 2016 Dennis Bohlke
Revised 03/12/16