|Parallel Port CNC XYZ Micro Step Motor Controller, XYZ|
Part Number: EMC-XYZ-MUBX
|Three(3) Axis Micro Step Motor Controller|
For Machine Tool Coordinate Positioning
Configured to run three axis XYZ mechanisms
XYZ Tables with NEMA 23 size stepper motors
Parallel Port step and direction Interface.
|Unipolar motor driver configuration|
Requires six(6) wire stepper motors
400, 800, 1600, 3200 Steps per Revolution.
Three(3) Ampere per phase maximum current capacity.
Each Motor has a TrimPot for Adjusting Motor Current
Each Motor has it's own drive electronics.
Each Motor has home limit switch circuit.
Each Motor has a DB9 female connector.
Each Motor has Home Limit Switch Circuit in Connector
Two(2) Control the Power to Two Main Power Recepticals on Connector PanelInternal 24 Volt 6.5 Amp. Power Supply, 150 Watt 120/240 switchable.
In metal utility box 10 x 10 x 4 inches.
Home Page at http://www.super-tech.com