EMC-XYZB-BX Half Step, 2 Ampere Three(3) Axis Machine Controller

Lite CNC Machine controller
XYZ Electronic Motor Controller
Integrated internal 24 Volt Power Supply,
150Watt 120/240 switchable and two(2) 12 Volt DC fans
Three(3) motor application
One(1) 10 foot Male to Male Parallel Printer Port Cable.
In Metal Box.

Part Number: EMC-XYZB-BX CNC Machine Tool Controller Specification
Computer Interface :Standard Parallel Port, Female DB25 connector on box
Input Power :117 VAC or 220 VAC
Axis :X, Y, Z, the two(2) Y axis motors are Synchronized
Steps Per Revolution :400
Motor Connectors :Female DB9 connector one for each motor
Motor Type :Stepper
Motor Size :NEMA 23
Relays :Two internal 10 ampere contact relays
Four(4) circuit Terminal block on connector panel for hookup
Minimum Step Pulse Width :5 microsecond, Normally Low
Motor Drive Configuration :Bipolar Chop Current Limited
Chop Clock Frequency :40 Khz
Phase Current :Trimpot Adjustable for each motor
Maximum 2.5A for each Motor
Internal Power Supply :24 Volts DC, 150 Watt, 6.5 Ampere
Cooling :Two(2) 12 Volt Fans wired in Series
Cabinet Contruction :All Metal UL approved electrical enclosure
Mounting Hole Pattern :Four(4) 0.25 holes, 9.125 Inch Square Pattern
Box Size :10" X 10" X 4"
Color :Tool Grey with Black Connection Panel
Total Shipping Weight :14 lbs
Connections Face Plate :Power ON/OFF Switch
Parallel Interface DB25 Female Connector
Three(3) DB9 Female Connectors
Terminal Block, four(4) circuit

Home Page at http://www.super-tech.com

Copyright 2016 Dennis Bohlke
Revised 03/12/16