Desktop CNC Computer Controlled Dremel/Rotozip, With Servo Motors
Engraving, Wood model making
Making Plastic Parts
Metal engraving
Working with Wax models
Circuit Board Engraving and Drilling
Jewelery Making
Connects to Parallel Port of Desktop Computer
No need to remove cover of computer to connect
Imports DXF, HPGL or G-code files
Seventeen different Engraving Fonts
Open Bottom For Chip and Dust Pan
Flat Plained Corian Table surface
Pattern of #8-32 threaded holes for material clamping

Front left view of MiniRobo 1285

Back view of MiniRobo 1285

EMC-XYZ-GSBX Controller and right back of MiniRobo.

Y Servo Motor on MiniRobo.

Servo Motor controller EMC-XYZ-GSBX hooked to MiniRobo.

RotoZip Mounted to MiniRobo with Servo Motors.
MiniRobo - MR-1285-GS Servo Motor Specifications
Work Area:X - Width: 12.0 inch (304.8mm)
Y - Depth: 8.5 inch (215.9mm)
Z - Height: 3.75 inch (95.25mm)
Accuracy:X & Y step distances is 0.00025 inch (0.000635mm)
Z step distances is 0.00025 inch (0.00635mm)
Machine Motion Speeds:Lowest: nnn inch/sec (nnn mm/sec)
Highest: n.n inch/sec (nn mm/sec)
Travel: n.nn inch/sec (nnn mm/sec)
Motors:Three(3) Servo Motors
Encoder 500 Cycles Per Revolution
Controller:PN# EMC-XYZ-GS-BX
Brushed Servo 3 Axis Motor Controller
Software:Comes with Demo Verison of Mach3
SuperCam for Windows 98 or ME available on request
Cables:Three(3) 6 foot DB15MF Servo Motor Cables
One 10 foot Parallel Cable
Overall Dimensions:Width: 27.0 inch (685.8mm)
Depth: 24.0 inch (609.6mm)
Height: 21.75 inch (552.45mm)
Weight:Net Weight: 69 pounds (31.3Kg.)
Shipping Box's Weight:24 X 24 X 12 - 53 lbs
15 X 15 X 17 - 27 lbs
Total Shipping Weight: 80 pounds
Interface:Standard PC Parallel Port
(Does NOT Work With ECP Ports)
Linear Force:Up to 55 pounds at low speeds
MiniRobo Animation Renderings Movies Pictures Specifications Assembly

Home Page at
Copyright 2016 Dennis Bohlke
Revised 03/12/16