PN_TAIG-3000-LB
Desktop CNC Micro Mill
3"x18' Bed
Max travel 11.75"-X, 4.75"-Y, 6.0"-Z
XYZ Electronic Stepper Motor Controller
Parallel Port Interface
0.000125 Step Size
Mach3 Ready
TAIG accessories
Milling Vise PN #TAIG-1225, 0-1/4"
Jacobs Chuck PN #TAIG-1091
Drill Chuck Arbor PN #TAIG-1140
Collet Set PN #TAIG-1040
TAIG-3000-LB Desktop CNC Half Stepping MicroMill Specifications
Half Stepping Motors on all three Axis
Electronic Motor Controller :Super Tech's   EMC-XYZB-BX
Motion Control Software :None Included
Table Size :18.375" Wide X 3.5" Deep
Maximum Travel :12"- X, 5.5" - Y, 6.0" - Z
Linear Position Resolution :0.000125 Inch
Coordinate Positioning Motors:Stepper Motors  200 oz in
Spindle Motor:1/4 HP  117 VAC 60 or 50 Hertz
Spindle Speed Contol :6 Step Pulleys and Belt
Spindle Speeds :1050, 1650, 2600, 4200, 6700, 10600 RPM
Total Shipping Weight :110 lbs
Shipping Cartons :3 boxes
14 x 14 x 14 inches 27 lbs
22 x 17 x 12 inches 40 lbs
22 x 17 x 12 inches 43 lbs




Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=PN_TAIG-3000-LB
Copyright 2016 Dennis Bohlke
Revised 03/12/16