|CNC USB to Parallel Port Adapter for SuperCamXp|
Part Number: USB-CamPod
USB CNC Machine Motion Controller for Windows Xp or Vista
CamPod is a USB to Parallel Port Adapter used by SuperCamXp to generate machine control signals.
The CamPod replaces the need for a parallel port on the host computer to drive step and direction CNC motor controllers.
The CamPod has a Female DB25 Parallel Printer Port Connector on one end and a USB connector on other end.
The CamPod uses an internal single board computer to create the step and direction signals for three axis motors, the maximum Step Frequency is 32,000 Steps Per Second.
The CamPod has output signals for Driver Enable, High/Low Motor Power and Home Mode for synchronizing ganged motors.
The CamPod creates the signals to control two relays. These are used for controlling Torches or Rotating Spindles, also coolant and vacuum control.
The CamPod has inputs for signals from Home Limit Switches.
Electrical Power for CamPod is drawn from the USB Cable.
The CamPod box size is 4 x 6.5 x 1.75 inches.
USB Cable is included.
USB Connection to the CamPod Box
Female DB25 Parallel Printer Type Connector
Home Page at http://www.super-tech.com