USB Interfaced Three(3) Motor Bundled CNC XY Machine Control Kit
Plug and Play compatible with Windows XP

Typical Use: Two(2) Axis XY Grantry type tables with NEMA 23 size stepper motors, glue spreaders, plasma tables.

Configured to run two(2) axis machine tools with the Y motors synchronized. This is for driving grantry styled machines with a motor for each end of the gantry bridge.

XYY configuration.

    USB interfaced, USB cable attached to the Controller.

    Bipolar motor driver configuration. Requires six(6) or four(4) wire stepper motors.

    400 Steps per Revolution.

    2.5 Ampere per phase maximum current capacity.

    Each motor has it's own drive electronics, home limit switch circuit, DB9 female connector.

    The two Y motors are synchronized for driving a gantry at both ends.

    Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable.

    In metal utility box 10 x 10 x 4 inches.

Three(3) PowerMax 214 oz-in Double shafted NEMA 23 stepper motors.
Crush proof Home Limit Switch pre-wired to each motor.
Three(3) ten(10) meter motor cables.
SuperCamXp CNC Machine Tool Control Graphics Operating System for Windows XP Desktop computers.

Price List

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item

Home Page at
Copyright 2016 Dennis Bohlke
Revised 03/12/16