USB CNC Four(4) Motor Bundled CNC XYZ Machine Control Kit

Part Number: USB-XYYZ-MUBX-K4

USB CNC Plug and Play compatible with Windows XP, Windows 7 and Vista

Configured to run three axis machine tools with the Y motors synchronized. This is for driving grantry styled machines with a motor for each end of the gantry bridge.

Complete Computerized Motion Control CNC Kit to Make Computer Controlled Power Tools - EveryThing You Need Electronic!

Typical Use:
Three(3) Axis XYZ Grantry type tables with NEMA 23 size stepper motors
Plasma Tables
Small Routers Tables
Engravers
Glue Spreaders

Includes:
Four(4) 300 oz-in Double Shafted NEMA 23 Stepper Motors.
Four(4) ten(10) meter motor cables.
SuperCamXp Graphical CNC Machine Tool Control Program

Key Features:
XYYZ Configuration
The Two(2) Y Motors are Synchronized for Driving a Gantry at Both Ends
USB interfaced, USB cable Attached to the Controller
Micro Step Unipolar Motor Driver Configuration
Requires Six(6) Wire Stepper Motors
By Default 1600 Steps Per Revolution
Jumper Configurable 400, 800, 1600, 3200 Steps Per Revolution
Three(3) Ampere Per Phase Maximum Current Capacity
Each Motor has it's Own Drive Electronics
Each Motor has Home Limit Switch Circuit with Low-Pass Filter
Each Motor has a DB9 Female Connector
Motors have 1/4 inch Diameter Shafts
Motors are Double Shafted
Crush Proof Home Limit Switch Pre-Wired to Each Motor
Two(2) Relay Controlled Main Power Recepticals
Relay Contacts are Rated at 10 Ampere
Power Supply is Internal 24 Volt 6.5 Amp., 150 Watt 120/240 Switchable
Completely Housed in Gray Metal Utility Box 10 x 10 x 4 inches

Price List
PN#USB-XYYZ-MUBX-K4, Three(3) Axis, Four(4) Motor Micro Stepping Controller KitPart# USB-XYYZ-MUBX-K4  XYYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Micro Step Motor Controller, three axis, drives four Unipolar motors, the two Y motors are synchronized. Two(2) Relay Controlled Main Power Recepticals. With SuperCamXp. Internal Power Supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 Switchable. USB interface with SuperCamXp. Four(4) motors and the cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 29 lbs........$1,495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
Pictures of USB CNC Four(4) Motor Bundled CNC XYZ Machine Control Kit

Picture of USB CNC Four(4) Motor Bundled CNC XYZ Machine Control Kit

Picture of USB CNC Four(4) Motor Bundled CNC XYZ Machine Control Kit

Picture of USB CNC Four(4) Motor Bundled CNC XYZ Machine Control Kit












Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=PN_USB-XYYZ-MUBX-K4
Copyright 2016 Dennis Bohlke
Revised 03/12/16