USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit

Part Number: USB-XYZ-MUBX-K3

USB CNC Plug and Play compatible with Windows XP and Vista and Windows 7

Complete Computerized Motion Control CNC Kit to Make Computer Controlled Power Tools - EveryThing You Need Electronic!

Typical Use:
Three(3) Axis XYZ Machines with NEMA 23 Size Stepper Motors
Taig Micro Mills
Laminate Routers
Dremel Drills
Plasma Torch Tables
Engravers

Key Features:
Configured to Run Three(3) Axis Machine Tools
XYZ Motor Axis Configuration
USB interfaced, USB cable attached to the Controller

Shipping Box
14 X 14 X 14 28 lbs Controller, Motors and Cables

Micro Step Unipolar Motor Driver Configuration
Requires Six(6) Wire Stepper Motors
By Default 1600 Steps per Revolution
Jumper Configurable 400, 800, 1600, 3200 Steps Per Revolution
Three(3) Ampere Per Phase Maximum Current Capacity
Each Motor has it's Own Drive Electronics
Each Motor has Home Limit Switch Circuit with Low-Pass Filter
Each Motor has a Nine(9) Pin DB9 Female Connector
Motors have 1/4 inch Diameter Shafts
Motors are Double Shafted, 1/4 inch Diameter
Crush Proof Home Limit Switch Pre-Wired to Each Motor
Two(2) Relay Controlled Main Power Recepticals
Relay Contacts are Rated at 10 Ampere
Power Supply is Internal 24 Volt 6.5 Amp., 150 Watt 120/240 Switchable
Completely housed in gray metal utility box 10 x 10 x 4 inches

Includes:
Three(3) 300 oz-in Double Shafted NEMA 23 Stepper Motors
Three(3) two(2) meter motor cables.
SuperCamXp CNC Machine Tool Control Graphics Operating System Program

Price List
XYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis,  Step MotorPart# USB-XYZ-MUBX-K3  XYZ, USB, Unipolar, 1600 Step/Rev, 3 Amp., Three(3) Motor, Three(3) Axis, Micro Step Motor Controller. Two(2) Relay Controlled Main Power Recepticals. Internal power supply, 24 Volt, 6.5 Amp., 150 Watt, 120/240 switchable. USB interface with SuperCamXp. Three(3) 300 oz/in NEMA 23, Double 1/4 inch shafts, Stepper Motors and three(3) six(6) foot motor cables included. USB cable included with controller. In metal utility box 10 x 10 x 4 inches.   Weight: 28 lbs........$1,295.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
Pictures of USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit

USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit

USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit

USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit

USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit

USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit

USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit




Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=PN_USB-XYZ-MUBX-K3
Copyright 2016 Dennis Bohlke
Revised 03/12/16