USB CNC Three(3) Motor Bundled CNC XYZ Machine Control Kit
Part Number: USB-XYZ-MUBX-K3A

USB CNC Plug and Play compatible with Windows XP and Vista

Complete Computerized Motion Control CNC Kit to Make Computer Controlled Power Tools - EveryThing You Need Electronic!

Typical Use:
Three(3) Axis XYZ Machines with NEMA 23 Size Stepper Motors
Taig Micro Mills
Laminate Routers
Dremel Drills
Plasma Torch Tables

Key Features:
Configured to Run Three(3) Axis Machine Tools
XYZ Motor Axis Configuration
USB interfaced, USB cable attached to the Controller

Micro Step Unipolar Motor Driver Configuration
Requires Six(6) Wire Stepper Motors
By Default 1600 Steps per Revolution
Jumper Configurable 400, 800, 1600, 3200 Steps Per Revolution
Three(3) Ampere Per Phase Maximum Current Capacity
Each Motor has it's Own Drive Electronics
Each Motor has Home Limit Switch Circuit with Low-Pass Filter
Each Motor has a Nine(9) Pin DB9 Female Connector
Motors have 1/4 inch Diameter Shafts
Motors are Double Shafted
Crush Proof Home Limit Switch Pre-Wired to Each Motor
Two(2) Relay Controlled Main Power Recepticals
Relay Contacts are Rated at 10 Ampere
Power Supply is Internal 24 Volt 6.5 Amp., 150 Watt 120/240 Switchable
Completely housed in gray metal utility box 10 x 10 x 4 inches

Three(3) 300 oz-in Double Shafted NEMA 23 Stepper Motors
Three(3) Six(6) foot Motor Cables.
SuperCamXp CNC Machine Tool Control Graphics Operating System Program

Price List
USB-XYZ-MUBX-K3A not found

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item

Home Page at
Copyright 2016 Dennis Bohlke
Revised 03/12/16