|USB Three Axis XYZ Half Stepping Bipolar Three(3) Motor Controller|
Typical Use: XYZ Micro Mills and Engraving Machines with NEMA 23 size stepper motors.
Configured to run three axis XYZ machines.
Unipolar motor driver configuration. Requires six(6) wire stepper motors.
400 Steps per Revolution.
2.5 Ampere per phase maximum current capacity.
Each motor has it's own drive electronics.
Each motor has home limit switch circuit.
Each motor has a DB9 female connector.
Step Motor Controller.
Internal 24 Volt 6.5 Amp. power supply, 150 Watt 120/240 switchable.
In metal utility box 10 x 10 x 4 inches.
Home Page at http://www.super-tech.com