USB CNC Desktop Taig Micro Mill Complete Three Axis Setup

Part Number: Taig-3000-LBMU
CNC USB Interface for Windows Xp or Vista or Windows 7
CNC Plug and Play USB Interface
Strong Smooth Reliable Machine Movement!
Inches or Metric Units of Measurement
Completely Assembled and Tested before Shipping.


Desktop Micro Mill
* Base Mechanism is Taig-2019CR-ER Micro Mill
* Axis Travel Distances 11.75" X, 4.75" Y, 5.25" Z.
* 20 Turns Per Inch Lead Screws on All Three Axis.
* 0.00003125 Inch Step Increment Size.
* Spindle Accepts ER-16 Collets.
* Spindle Motor is 1/4 hp, 120 VAC.
* Precision Spindle with Runout Less than 0.0005 inch.
* Spindle Pulleys have six V-belt slots for setting speeds.
* Spindle Speeds are 1050,1650, 2600, 4200, 6700, 10600.
* Crush Proof Home Limit Switches Wired and Tested.
* Spindle Power Switch on Main Column.

TAIG Accessories Included
Milling Vise
2 End Mills - 3/32 and 3/16 inch
ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch

CNC Motor Controller USB Interface
* Mighty Box Micro Stepping Motor Controller with USB Interface.
   Controller and Motors are the Part Number: USB-XYZ-MUBX-K3
   Includes SuperCamXp for the USB interface.

* Three 300 oz/in NEMA23 Stepper Motors.
* Double Shafted with 1/4 Shafts for Attaching Knobs or Handles.
* Three Motor Cables Six Foot Long Each.
* Each Motor has a Nine(9) Pin DB9 Male Connector.
* 1600 Steps per Revolution on XYZ axis motors.
* Internal Power Supply of 24 Volts, 6.5 Ampere.
* Controller Main Power is 120 or 240 VAC input.
* Trimpot Adjustable Motor Phase Currents.
* Home Limit Switches Wired and Tested.
* Spindle Motor Relay Control Receptical on Controller Box

Shipping Boxes
Three Boxes 120 Pounds Total Weight.
21 x 17 x 10 41 lbs Mill Base
21 x 17 x 10 50 lbs Z Axis
14 x 14 x 14 29 lbs Controller, Motors and Cables
Price List - USB CNC Desktop Taig Micro Mill Complete Three Axis Setup
PN#Taig-3000-LBMU, Taig Micro Mill with USB interface to Micro Stepping ControllerPart# TAIG-3000-LBMU  Taig Micro Mill with Micro Step Controller and Motors, 0.00003125 increment of movement on all three axis. Includes: USB-XYZ-MUBX Micro Step Motor Controller with USB Interface and Internal 24 Volt Power Supply; SuperCamXp CNC Machine Tool Control Graphics Operating System; Spindle is 120 VAC, TAIG accessories - Milling Vise, 2 End Mills, ER Collet Set - 3/8, 5/16, 1/4, 3/16, 1/8, 1/16 inch   Weight: 120 lbs........$2,495.00

Click on CheckBox to include in Order
- Click on 'AddToCart' to Create New Order or Add Item
Super Tech's Taig Micro Mill Pictures




Taig Tool's Desktop Micro CNC 3 Axis Mill.

This the bottom part of the mill.

Front Right View, Taig Tool's Desktop Micro CNC 3 Axis Mill.

The top part attaches to the bottom part with one large nut, washer and screw. Make sure the vertical part is perpendicular to the bottom part.

Desktop Micro CNC 3 Axis Mill with three stepper motors mounted.

Micro Stepping Controller with USB interface and SuperCamXp.

Taig Tool's Desktop Micro CNC 3 Axis Mill with the electronic stepper motor controller, motor cables and the parallel cable. It is not hooked up.

Taig Tool's Desktop Micro CNC 3 Axis Mill.
 







Home Page at http://www.super-tech.com

http://www.super-tech.com/root/grp.asp?p1=PN_taig-3000-lbmu
Copyright 2016 Dennis Bohlke
Revised 03/12/16